Activity Stream
227,828 MEMBERS
11652 ONLINE
greengrassforums On YouTube Subscribe to our Newsletter greengrassforums On Twitter greengrassforums On Facebook greengrassforums On Google+
banner1

Results 1 to 10 of 10
  1.     
    #1
    Senior Member

    Tap water PPM

    Ok how low of PPM before you start supplementing cal and mag? My Tap water is 40 PPM should I be supplementing with CalMag?
    maro69camaro Reviewed by maro69camaro on . Tap water PPM Ok how low of PPM before you start supplementing cal and mag? My Tap water is 40 PPM should I be supplementing with CalMag? Rating: 5

  2.   Advertisements

  3.     
    #2
    Senior Member

    Tap water PPM

    You need to add cal mag plus to get it up to 250 ppm's and then add nutes. A little shy of that won't hurt.

  4.     
    #3
    Senior Member

    Tap water PPM

    Lock Ness on probee,
    do you mean get the
    Cal. Mag. ppms up to 250 ppm then add the nutes ?
    Like my total ppms of my source water is 300 ppm
    The Cal. could be from 6 - 25 ppm, according to the town's readings.
    The Mag. could be from 2 - 8.0 ppm.
    Do you mean get the total ppm of the source water be about 250 ppm
    and then add cal. mag. until it comes up to 300 ppm ..then adding nutes
    will raise the ppm of your Res.
    Like my set up started at 300 ppm. Then i add General Hydroponic
    nutes 1, 2, 3. which brings it up to about 350 ppm.http://boards.cannabis.com/images/smilies/stoned.gif
    Zeff

  5.     
    #4
    Senior Member

    Tap water PPM

    Quote Originally Posted by LOC NAR on probation
    You need to add cal mag plus to get it up to 250 ppm's and then add nutes. A little shy of that won't hurt.
    :thumbsup: Thank You

  6.     
    #5
    Senior Member

    Tap water PPM

    Zeff your water starts at 300 and after nutes is at 350?? something seems odd with that. What kind of setup you have? How big is your res, if you have one. How old are plants?

  7.     
    #6
    Senior Member

    Tap water PPM

    Hello Tinytoon, ......Zeff your water starts at 300 and after nutes is at 350?? something seems odd with that. What kind of setup you have? ...It's Ebb & FlaFlaFluey.... How big is your res, if you have one.......55 Gal...... How old are plants?...Right now they
    are 3 days shy of ONE month young.....I mix up a gal. of nutes
    General Hydro.1, 2, 3, feed'm that, at or below the " legal dose ! "
    I get the 350ish ppm from the 55 gal. res. after it takes back the gallon that
    i poured into the controller ( smaller feeder ) 1 gal. res.
    Ok so, as i'm writting this i realize i should do a ppm reading after
    i mix uppa batch, before it goes into the system. DAAAAAA ! O tay boss !
    Ok, just did that and the PPMs are 650....so i add that to the "controller " res.
    as i goes into Flood mode. When the " tide goes back out to sea " to the 55 Gal. res. that's where i get the 350 ppm !

    pH being ( left out of the conversation ) is always kept in the range of
    5.6 to 6.5


    I have a posting somewhere around here on
    Cannabee Forums Message Board

  8.     
    #7
    Senior Member

    Tap water PPM

    PH sounds good but back to the nutes. When you mix nutes up are you just figuring the 1 gallon your using to mix or are you mixing strength for the water in rez?? I give example for ya so we on same sheet of music. I believe we have the same system as I have a 55 gal rez too and also use GH. At your stage I would have 27 gals in my rez. At the mix I go by that would be:
    Micro 5 ml per gal = total 135ml
    Grow 5ml per gal = total 135ml
    Bloom 5 ml per gal = total 135ml
    florishous plus 8ml per 5 gal = total 40ml
    Not saying your mixing wrong just seems real lite for some reason. are you running nutes full strength or partial atm?

  9.     
    #8
    Senior Member

    Tap water PPM

    Hello toons,
    The nute mixture is a gal. atta time. when I'm home I mix up a gal. of nutes
    when the timer flips i add the nutes to that nute res. or what " they " call
    controller res. ...so actually the 55 Gal. Res. just gets
    the return of the of what the tide brings back... That way the ppms are a
    controlled and gradual build up. If anything fukes up one would only have to
    replace a portion of the 55 Gal. res. instead of all of it !

    If one brings the nutes up in the 55 Gal. res. all at once. Then the girls
    ( often do ) " change their minds ! ! ! " you gotta change out more or all
    of your 55 Gal. res.

    Now rev it up, smoke the tires. But get your self a " Valentine Radar "
    That's what i used when i was commuting from Boston to the Cape
    on my bike ! Never failed me !
    Peace over&out,

    Grantman, F'n Grantman ! is this you ! ! ! ! !?????

    if it is you know it's me !

    Wait ! do you own horses ! Now only i would know that !

    Cuz it sounds like you ! ! !

    ZoroZeffer

  10.     
    #9
    Senior Member

    Tap water PPM

    Nope not Grant, just Tiny trying to lend a helping hand

  11.     
    #10
    Senior Member

    Tap water PPM

    No Ok, yeah, Grantman would have know who i am, cuz'n i nicknamed him that!

Similar Threads

  1. Replies: 0
    Last Post: 11-22-2013, 02:48 PM
  2. Can i use FloraMicro hard water with soft water??
    By blank_21 in forum Indoor Growing
    Replies: 3
    Last Post: 06-24-2010, 08:50 AM
  3. Lockout- Hard water, rain water, choices!
    By Chronic Chrissy in forum Plant Problems
    Replies: 45
    Last Post: 06-20-2008, 04:10 AM
  4. I water my plant with bong water.
    By josemartinez915 in forum Basic Growing
    Replies: 33
    Last Post: 02-26-2008, 11:43 PM
  5. Replies: 1
    Last Post: 09-13-2007, 05:30 PM
Amount:

Enter a message for the receiver:
BE SOCIAL
GreenGrassForums On Facebook