I am using solid black buckets, and solid black lids, the hoses on the side of the bucket to measure the water level are blue I sealed the holes I drilled for the black fitting with black rtv silicone I sealed the black fitting with black rtv silicone. I am using blue air stones I purchased from Walmart (I am a little broke) I am using black solid hose to feed from air pump to air stones, I also sealed the holes in the lid were I put the air hose through with black rtv silicone. I am going to completely cover the STG cube with hydroton when I put them in the buckets.
ELEL95 Reviewed by ELEL95 on . Need expert advice I need some expert advice. This is were I am at I am going to be doing a DWC I have some black buckets, two air stones per bucket and an air pump, my lighting will be two, four foot T5 fixtures two bulbs per fixture. I started from seed with ph'd water on the napkins, when I they popped roots I then moved them to the suretogrow cubes. I have them sitting in a bed of hydroton in a pyrex container, under the pyrex container I have a heating mat. I keep the whole container in a plastic tote. Of Rating: 5