Ok if I have never said it before I'll say it now ...... you MUST soak your hydrotron in PH balanced water until the water is at the ph needed so it might take a couple times of soaking to get PH down. That being said guess what I didnt do .......... constant PH rise and only thing I can think of is a 50# bag of Hydrotron was added to what I already had and it got rinsed real well but didnt think ahead and didnt have time to soak as clones were going into their buckets
tinytoon Reviewed by tinytoon on . Tiny's Happy House of Hydro Sorry has taken so long but I did promise it would happen. Here come the pics and I'll try to explain things a lil. Room is aprox 12x8x6 2x4 walled with plywood for walls and r13 insulation on the outside of wall. Have a nice lil heater that does good job for room size but without any type of glowing element, the only light from it is temp setting and such which is covered up. Dehumidifier also with red bucket full light blanked. 16' osilating fan. 6" 435 cfm exhaust fan pulling through 100% Rating: 5