Sorry has taken so long but I did promise it would happen. Here come the pics and I'll try to explain things a lil.
Room is aprox 12x8x6 2x4 walled with plywood for walls and r13 insulation on the outside of wall. Have a nice lil heater that does good job for room size but without any type of glowing element, the only light from it is temp setting and such which is covered up. Dehumidifier also with red bucket full light blanked. 16' osilating fan. 6" 435 cfm exhaust fan pulling through 100% organic charcoal filter. 2 Nextgen 600w ballasts running 2 Sun System Yeild Master II supreme reflectors. 6" 435 cfm fan pulling through same type filter to cool lights. Atm light cooling is just dumped outside room into basement but hooking up to old dryer vent to get heat outside for summer. Using Ebb&Grow system, only ran 10 buckets on virgin run. 55 gal rez, 300w aquarium heater, 2 4" airstones that will be replaced by 2 12" stones next run, CAP tri-meter, 1/3 hp sump pump that pumps 600 gph to drain rez and a washing machine water supply to fill the s o b. Still running GH 3-part and have quite the shopping list for round 2 which I am also adding 8 more buckets for total of 18 plants next run. Hopefull I not leave anything out but if ?? just ask :jointsmile:

pic 1 Ballast light 1
pic 2 Ballast light 2
pic 3 water supply
pic 4 Rez and drain
pic 5 wall with door and intake
tinytoon Reviewed by tinytoon on . Tiny's Happy House of Hydro Sorry has taken so long but I did promise it would happen. Here come the pics and I'll try to explain things a lil. Room is aprox 12x8x6 2x4 walled with plywood for walls and r13 insulation on the outside of wall. Have a nice lil heater that does good job for room size but without any type of glowing element, the only light from it is temp setting and such which is covered up. Dehumidifier also with red bucket full light blanked. 16' osilating fan. 6" 435 cfm exhaust fan pulling through 100% Rating: 5