You will need:

1. Drill, 1" drill bit, 1/2" drill bit
2. 1/2" 1/2" stiff black water tubing, 1/2" 5/8" clear hose, and garden hose.
3. >370 gph pond pump, with at least 12 foot height torque-rating. The stronger the better.
4. 3" hydro net basket
5. 3" pvc pipe
6. 3" pvc pipe end piece
7. There are some other small fittings that I will describe later.
8. 5 gallon bucket
9. Strong container that fits perfectly inside of top rim of bucket
10. Various bolts.
11. Filer for shaping grooves in plastic.
12. Lavarock: largest kind
13. Rockwool
14. wet dry vac
15. patience

I may add more later. This is a good start.
AquaponicHerb Reviewed by AquaponicHerb on . "Suckit Bucket" DIY thread You will need: 1. Drill, 1" drill bit, 1/2" drill bit 2. 1/2" 1/2" stiff black water tubing, 1/2" 5/8" clear hose, and garden hose. 3. >370 gph pond pump, with at least 12 foot height torque-rating. The stronger the better. 4. 3" hydro net basket 5. 3" pvc pipe 6. 3" pvc pipe end piece 7. There are some other small fittings that I will describe later. 8. 5 gallon bucket Rating: 5