Why don\'t you just use the EZ cloner for making clones and build an aero set-up. All it takes is a rubbermaid container, a submersible pump around 396 gph, 1/2 inch PVC, appropriate fittings to mate to the pump and ez cloner 360 sprayers. There are lots of resources for specific build designs and you should be able to put something together for around a $100. It\'s really not that hard to do and doesn\'t take too many tools, with the most expensive being a hole saw and mandrel you\'ll need to make holes in the top of the rubbermaid container for your net pots.

If you go this way, make sure to mix you nutes somewhere in the range of 40-50% of the manufacturers recommended strength. This is because in an areo system you\'re applying the nutrients directly to the roots.

Good luck.

Peace,

Farmer Rich
Farmer Rich Reviewed by Farmer Rich on . Ez Cloner to Aero setup? I was given one so i have a ezcloner 30 setup. I dont use it.. Could I take the mister and put it in my rubbermaid dwc container and turn that to aero? by lowering the water height? The net pots are only 3" or 4" right now so I think thats about right. Let me know if this might work. or if you can link me to someones similar setup. Rating: 5