Activity Stream
227,828 MEMBERS
11353 ONLINE
greengrassforums On YouTube Subscribe to our Newsletter greengrassforums On Twitter greengrassforums On Facebook greengrassforums On Google+
banner1

Page 1 of 2 12 LastLast
Results 1 to 10 of 12
  1.     
    #1
    Member

    2nd Grow - Bubbler Mex Strain

    This is my second attempt at a grow. I borrowed all of the materials, minus the pepsi cooler for my first grow, and added a few more for this one.

    Three seeds 1 Trainwreck and 2 X2 (expiriment 2). The x2 is some really good redhair bagseed I was saving the seeds for a later grow. Added some CFL's for this one since I had started my grow around late August and the temps were high.

    Used a 5 gallon tupperware painted with a piece of tape removed to check water levels. Two bubblepads with a T-coupling running to one 40 gallon airpump. A drip system on a timer was used in the beginning until the roots were long enough to sit in the water for the most part. 15 mins. every three hours. Water level fill line 3 gallons.

    3 5.5" net cups with soaked hydroton.
    Fox Farms Grow Big Hydro 3-2-6
    Advanced Nutes Bloom 0-5-4
    Gen Hydro Bloom Something 0-10-10

    I generally go from the Fox Farms schedule and wing it from there. I'm pretty poor and like i said I'm using a lot of my old stuff and do everything I can in between on this one to keep it going in the right direction. I use about 3/4 strength on the nutes and do a rough calculation on the dosages from the numbers on the chart. Tap water is highly alkaline about an 8. I like to let it sit in a 8 gallon container with the lid off for a day or two and then lower the ph to right at 5.5. I know the ph will naturally rise to 6.5 in my system and then I lower again by simply adding fresh water from the container.

    I add the nutes the the reseviour directly by the teaspoon and just leave it for about a week making sure the water level doesnt get too low.

    Here's a pic some pics. Week 2




    Week 4




    sorry the pics are so big. will update later.
    redaaron Reviewed by redaaron on . 2nd Grow - Bubbler Mex Strain This is my second attempt at a grow. I borrowed all of the materials, minus the pepsi cooler for my first grow, and added a few more for this one. Three seeds 1 Trainwreck and 2 X2 (expiriment 2). The x2 is some really good redhair bagseed I was saving the seeds for a later grow. Added some CFL's for this one since I had started my grow around late August and the temps were high. Used a 5 gallon tupperware painted with a piece of tape removed to check water levels. Two bubblepads with a Rating: 5

  2.   Advertisements

  3.     
    #2
    Member

    2nd Grow - Bubbler Mex Strain

    Ok. So you probably see a few things that should be addressed.

    1) The plants could afford to be spaced out. Again I was so poor I didnt have the spare duct tape to move one of the pots to another seat in the container.
    2) There are light issues as far as light penetrating inside the container and on top of the grow rocks. Any grower is best advised to make the resevoir completely light proof and on the hydroton to avoid algea growth. Otherwise, rock on.

    Some more photos right before sexing

    20-24 hours light 8-1600 lumen 6500k CFLs ~5000 lumens/ft squared.
    Temp 70-80 Humidity 20% (low i know but i keep a mister nearby with pHed water)

    Week 5





    The TW keeps moving around but it's easy identifiable by the broad leaves. Here's hoping it's female. Hey let's just hope at least one is.




  4.     
    #3
    Member

    2nd Grow - Bubbler Mex Strain

    Week 6

    Unfortunately, two of the plants were male. Only the beastly wild one showed calyxs but the grow will still go on. These plants were all topped every 3 nodes until I wasn't sure how much room i would have so about 3 times. This leaves just the one x2 plant and we will continue with the experiment. Covered the resevoir with towels to help keep the water from evaporating and getting light involved. Stepped back to a 12 and 12. Here's some photos that explain things better.





    Week 7
    Changed to 400w hps. Temps pretty good about 75-80 because its now November and Im actually using the light to help heat the house. :rastasmoke:



    Also added a homemade 12"x8" carbon filter with a 240cfm inline duct booster fan. Works great. :jointsmile:

  5.     
    #4
    Member

    2nd Grow - Bubbler Mex Strain

    Week 8






  6.     
    #5
    Member

    2nd Grow - Bubbler Mex Strain

    Week 10

    These pictures are current and were actually taken today. Skipped photos of week 9. This was over Thanksgiving holiday and working a lot so I ran into some heat problems being too close to the light and resevior getting low leaving too many salts in the system. So nonetheless there are some fan leave issues being yellow or spotted. I haven't been as motherly since knowing they are just bagseed but shouldnt hurt the plants much at all to just tug away all the bad leaves. Trimmed a bunch of the smaller brances at the bottome to make way for bigger buds up top.

    Got a better camera hopefully the pictures come out better.







    About a million hairs and the crystals are starting to multiply. No telling and really my biggest question is when do the calyexs start to swell? I estimate about at least another 3 weeks with the sativa but I guess only time will tell. Gonna borrow my buddies microscope to start getting a closer look.

  7.     
    #6
    Senior Member

    2nd Grow - Bubbler Mex Strain

    looks like your going to have some nice baseball bat sized nugs there :thumbsup: .. and interested how you hooked up your drip system

  8.     
    #7
    Member

    2nd Grow - Bubbler Mex Strain

    Thanks deleafer. I started off using Rapid Rooters and a digital irrigation timer from home dePOT w/ a battery backup (about $20). Works great until they are ready to work on just bubbles. Or just any timer that will let you set in 15 min intervals. I also add a bubblepad for precation to make sure the pump is drawing freshly oxgenated water from inside the resevoir and directly on to the Rapid Rooters.

  9.     
    #8
    Member

    2nd Grow - Bubbler Mex Strain

    I have a few questions here for the knowledgeable people.

    1) I pulled a few popcorn buds from the bottom and dried them out. Inside th buds I found SEEDS ... bummer. This could have been caused from either light interference, low resevoir/high nute concectration (bubbleponic), or just bad genetics. SO, what now?

    The buds are still producing THC because the trichomes are still multiplying (is my hypothesis). And some of the seeds are already ripe. only about 10% of the pistils are dried up and turned color.

    What should I expect? What should I do with this plant? Wait for the buds to finsish and smoke them? Make hash? What are the side effects of going "hermie" and all that?

    Got pictures of it in its current stage. Post them if anyone's interested.

    2) How to post pictures? Used to be you could post them and they would have a resize when you hovered over them. I forgot how to do that. Thanks

  10.     
    #9
    Senior Member

    2nd Grow - Bubbler Mex Strain

    Super nice looking grow, Bub! I grow in soil only so I don't know but I do know a little about hermies! <G>
    I try and elliminate any male flowers when I can. And if I were growing for seeds I would pull any plant with a male flower. But for smoke, it's a judgement call...

    Shov

  11.     
    #10
    Member

    2nd Grow - Bubbler Mex Strain

    wanted to post the finished product. I got about a qp from this one plant and it was amazing. too bad it didnt last very long. some of the best bud ive smoked in a long time. the crystals were crazy. the bud didnt really get the full effect until after curing. the taste was earthy and fruity. the stickyness was insane.

    i didnt have a problem with seeds at the tops of the plants only the lower 25% of it and all in all I cant complain cuz i got some feminized seeds out of it to save for a rainy day.

    was my first harvest ever so bare with it please. haha.

    next batch in progress... ww, purple (ceres), and pineapple express....
    all of these are new strains to me and all of them are hybrids so deciding whether to ScrOG or just top these will be made later. currently germiniting.

Page 1 of 2 12 LastLast

Similar Threads

  1. first time bubbler grow need advice
    By reef3er in forum Hydroponics
    Replies: 5
    Last Post: 08-17-2008, 05:42 PM
  2. Im doing a bubbler grow and have a few questions
    By zerocool5878 in forum Hydroponics
    Replies: 10
    Last Post: 11-18-2007, 06:08 PM
  3. 1st cabinet CFL bubbler grow
    By nauticaboy84 in forum Grow Log
    Replies: 6
    Last Post: 07-20-2007, 08:37 AM
  4. New Bubbler Grow Coming Soon - Input Welcome!
    By mackSwell in forum Hydroponics
    Replies: 61
    Last Post: 03-24-2007, 01:56 PM
  5. New bubbler grow
    By fhydro in forum Hydroponics
    Replies: 16
    Last Post: 12-05-2005, 04:58 PM
Amount:

Enter a message for the receiver:
BE SOCIAL
GreenGrassForums On Facebook