This is my first attempt at aeroponics. It's a Clone and Grow 16. I have eight plants started from seed on 1/9 and I just switched to the flowering cycle. All plants are full and lush between 7 and 12 inches. I worked through my stem issue and all are now strong and healthy. My system is a root mister cycled for 60 secs on and approx. 10 minutes off.

Other vitals inside grow tent (4X4): 400 W HPS (400 W MH During veg cycle), exhaust fan with carbon filter, 6" circulating fan, 5 gallon reservoir with fishtank aereator. Current temp inside tent is 76 degrees and humidity is 31%, reservoir temp is 68 degrees and ph is 5.6 and nutrient ppm is measuring 1445.

I'm a real novice (newbie), third grow, first aero (other grows were hydro) and what I know I've learned here or other reading. Do the above "vitals" look OK?

My current problem is the roots. In one of my tubes (4" diameter X 34" long) roots have managed to grow into and thru my drain tube into the reservoir and are now in the nute solution. Any advice on what to do about this?
ElvisG Reviewed by ElvisG on . Aeroponics - Who's using it now? Hey All, Been a while since I started a thread so here goes.. I switched to aeroponics earlier in the year and finally feel like I'm getting it dialed in on a more consistent basis. I'd like to get a thread going to talk about what has been working and what didn't. From an experience level, I'm into cultivation for about 2.5 years now and relatively anal about doing things accurately when it comes to mixing nutrients and water. My approach to aero is fairly simple; I used the HT Rating: 5