I rigged up a pipe using a pen shaft, I took its 'guts' (pen innards) out and then lightly heated the end piece were you would write from and bent it straight up. I then put a piece of metal tubing approx 1 inch long on the top so it squeezed down onto the pen until it could go no further. I used a small amount of white (non-toxic) school glue to seal the bottom. I then covered it with electrical tape. I put a bolt on the end and made an aluminum foil screen. I'll post pictures shortly. My question is - are there and can there be any health hazards associated with this pipe? I don't have a pipe anymore so here I am.
kyle Reviewed by kyle on . Homemade pipe (health hazards?), read asap I rigged up a pipe using a pen shaft, I took its 'guts' (pen innards) out and then lightly heated the end piece were you would write from and bent it straight up. I then put a piece of metal tubing approx 1 inch long on the top so it squeezed down onto the pen until it could go no further. I used a small amount of white (non-toxic) school glue to seal the bottom. I then covered it with electrical tape. I put a bolt on the end and made an aluminum foil screen. I'll post pictures shortly. My Rating: 5