aero/fog LED grow table

[oldmac]

thats awesome what did u use for lids?

Hi disrupt86,

The lids and trays are made by American Agritech now Botanicare, and I purchased the lids "blank" or un-drilled.

The holes are 44mm or 1 7/8" to use 2" net pots. Which I have found are not all the same. While the sample I used fit very nice the few thousand that we bought are slightly larger and don't fit as nicely. The neoprene collars I'm using are called "black stars" and are so much nicer then the typical EZ-clonner ones.

BTW: For anybody interested, I put up an album showing the building of fogfognugen.

Couple of pics of net pots and collar. The net pot on the left is the sample I used the one on the right, slightly larger.

oldmac Reviewed by oldmac on 09-29-2009. aero/fog LED grow table Just a couple of pics of an aero/fog ponic tray I built. This is 1/2 half of "fogfognugen" a 2 tray 4'x4' franken fogger I built. It uses two types and sources of fog; one is a "dry" fog made by a FrapaPlas ultrasonic fogger and second is a series of misting nozzles run off a pump currently running @ 180psi. Going to start it out out with 2 TI Pro-Bloom's together on a light rail.:) Was just working on light foot print/spacing of lights. Just abt ready.:D Rating: 5