THC extract

[MadSativa]

lol ok, keep it pure I guess is the point, after all this your gonna try bho in the future and just switch your oils to BHO, it is cheaper and better, and easier, way more easier than the ISO extraction, and if you know the add water trick their is little clean up.

Again though I gotta side with the bubble extraction method, I just like the product way more.

[sunbiz1]

I made a butane extractor and used it for male plants. Thanks for the youtube link as well!!.

Biz

this thread confuses me a little, I know it is about ISO hash, but it is very old. In fact BHO is the preferred method of making hash oil, for at least 2 years, now.

butane extraction is much safer and better product then ISO hash any day. Much more pure when done correctly as well. I use a Okeif extractor, and a butane that is refined at least 4 times.

It is important to not use heat of a open flam, and also to be out side or in a well ventilated area. here are some links and vids, to use.

Also personally I really like iceolator hash, better, the taste the high everything.

Also it is not difficult to smoke oil, they have special bowls, domes, and bells you can use with your glass on glass bong. but you really don need any of these. I use a clean bong, and a torch, like a brulee torch, or even a cigarette torch, that can be bought at the corner store.

I use about 5-8 new clean screens, and just lay them flat on the bowl, so you get a plate of screens or a flat surface on your bong bowl, blob a dab of oil on top of your screens, it is easy use your torch to keep things clean, then hit it with the torch, inhale quickly, and there you go you are taking, BHO bong hits. their are also special bowls know as oil domes, oil bells, and extract bowls, that you can buy just for smoking PURE

Oh and the oil smokers I know, always whip it, for essayer handling storing, and more PURE smoke. look up whipping hash oil if you dont know what whipping your oil is all about. I hope this helps someone, cause this thread was a long read, and I still am confused

oh I don't make to much bho, it is for growers or the rich, but I did make some recently and it was very goo, and really does take only minutes to cure and smoke.

http://www.youtube.com/watch?v=6kW7F...e=channel_page


okief butane oil tubes

and if I dont say some of my buddies will be mad

"KEEP IT PURE"

[ForgetClassC]

butane hash is more potent, 99.6% THC

[sunbiz1]

The whole process is actually based upon gravity/chemistry, liquid gas strips the THC and then reverts back to a solid. However, you have to keep the oil warm and pliable before whipping into what comes out as a cookie dough smokeable type hash. If you don't process correctly, you wind up with an oily glue that is difficult(if not impossible)to work with.

:rastasmoke:

butane hash is more potent, 99.6% THC

[eastbaygordo]

butane hash is more potent, 99.6% THC

Don't do the butane honey oil extract, you risk doing the same time a crank cooker would do. That process is a felony. Learned it in class they other evening.
Sad but true.

[ForgetClassC]

It's not like I manufacture it, my buddy did it once

[MadSativa]

you made it from male plants wtf, I would not think that would work lol, caseu male plants dont have much thc.

and like I said dont use a open flam, you run no risk, but inhalation, and if you do it in an open area, you are fine, lol, blow up,,, you didn't watch the video did you. us heat form hot water, and dont do it out in the direct sun, but it is ok if done so in the sun, just avoid hots spots, that can ignite the mix, you are evaporation the butane, with heat, because its evap temp is less than room temperature. If done correctly you have only thc OIL left, which means the purity is higher. This process is used to make other oils and extracts as well form other plants and many other things.


If done incorrectly you can blow up, so dont be a deaxmass.

[sunbiz1]

Yes, you can use male plants as well. The yield isn't as high, but it does work. As you mentioned, do NOT do this indoors. Also, you can use a hangar to hold the extractor over the heated glass casserole plates rather than going to all the trouble of that fancy holder the youtube vid shows.

you made it from male plants wtf, I would not think that would work lol, caseu male plants dont have much thc.

and like I said dont use a open flam, you run no risk, but inhalation, and if you do it in an open area, you are fine, lol, blow up,,, you didn't watch the video did you. us heat form hot water, and dont do it out in the direct sun, but it is ok if done so in the sun, just avoid hots spots, that can ignite the mix, you are evaporation the butane, with heat, because its evap temp is less than room temperature. If done correctly you have only thc OIL left, which means the purity is higher. This process is used to make other oils and extracts as well form other plants and many other things.


If done incorrectly you can blow up, so dont be a deaxmass.