thumbsup:Thanks for the info;
I have tried to pull the plants out of the pipe with no luck, the root mass is very strong. The only other option I would have had would have been to cut in between the holes and then I would be able to get at all of the plants, but destroy the Pipe, and stress the plants:
Here is what I have done. First off I went to feeding the plants 3 times per day at 30 minute intervals, now 20 hours water. Placed 2 - 1000 watt , in the middle of the 4 - 450 Watt that I have going.
I took a 1/2 inch PVC pipe and slid it under the Rock Wool all the way down the pipe, I thought this would give the root some air, and so far it has worked fantastic. Pics this weekend.
For the first time since I started this Grow I am excited about the weekly measurement. I have really noticed the growth in the last couple of days and well tomorrow we will see, if I am on the Road to Recovery. Yesterday discover spider mites used magnifies glass to confirm Today I went to Town and purchased Safers End All 2 and used as directed, this AM. I looked with glass about 1 hour later and there was no movement. Will keep close eye and them now.
I will post pic's after week measurement is official. Ha ha ha:hippy:
sccrocks Reviewed by sccrocks on . SOS HELP WITH EVERYTHING There are two parts to this grow.:) I have an ebb and flow system I think. The size of the room is 12 x 20 and i am using 4 inch pvc pipe with holes every 8 inches for a total of 16 plants per pipe. Pipe is 10 feet long I have a reservoir at one end with Air Stones and a small pump, and a 6 inch Pipe that sits on top of the 4 inch pipes and stores water until needed and drains into pipe as required. I am using GH Flora Grow at 700 on Dip Stick. I have white plastic Mylar on Walls, Floor Rating: 5