Results 1 to 10 of 12
-
02-22-2009, 09:13 AM #1OPMember
Explain to me TDS, PPM, EC...
Can someone explain to me Total Disolved Solids, Parts per Million, and EC? I know readings are different for different nutrients/rez. sizes etc. but is there a general rule of thumb what should be what?
WeedTree's Reviewed by WeedTree's on . Explain to me TDS, PPM, EC... Can someone explain to me Total Disolved Solids, Parts per Million, and EC? I know readings are different for different nutrients/rez. sizes etc. but is there a general rule of thumb what should be what? Rating: 5#1 [SIZE=\"5\"]BUCKETS[/SIZE] Henchman
5 Gallons of Pure Pleasure
-
02-22-2009, 11:23 AM #2Senior Member
Explain to me TDS, PPM, EC...
...Text
-
02-22-2009, 01:26 PM #3Senior Member
Explain to me TDS, PPM, EC...
Very good answer, I'll have to mark that page.
Is that what you were looking for ? Remeber it will tell you PPM's but not what chemical it is. The water companies put chlorine and flouride in the water and many peeps think if you let it sit overnight the chlorine evaporates. Sorry to tell you it does just enough to not smell. Check with meter before and after. Many TDS stays in the water. Being a heart attack patient this bothers me because there are many solids still in the water clogging up your viens. I try to drink what my plants drink R/O water. if I want other things like nutes or vitimans I put them in there. On the other hand well water has iron and minerals but still you don't know what just how much.
Manufactures specs on nutes should be the same no matter what size rez you have. We talk mostly about PPM's because that is most common coversion of TDS and EC.
I mix nutes to the PPM of what stage I'm in. veg is lowwer than flower. In R/O water that starts at 0. Then I mix additives like calmag, superthive, bud blood, bigbud, carboload or what every you use even molasses.
Not quite sure what the question is about rule of thumb except alway mix nutes first to what level you want. Some mixes I make can reach 1400 PPM's at flower time all together.
-
05-06-2009, 08:07 PM #4Junior Member
Explain to me TDS, PPM, EC...
Could you elaborate more on the PPM's with your R/O filter and calmag? I'm attempting to use a decent R/O (i get 17 ppm) with the Gen Hydro 3 part Flora series. After severe deformities and malnurishment, I found out that Calmag is a must!! So now the growth is instantly back to normal and going fast. But, unfortunately the leaves have a tiger striped yellow/green look almost like under fert possibly. I called the tech at G.H. and I think it was the biggest waiste of time in my life (see another thread). Anyway, so far there has been nobody I can find who can shoot from the hip with personal experience a clear answer about the Gen Hydro 3 part PPM's.
I've seen a million grow log's and a billion posts discussing PPM's and how important they are yada yada.... but no posts (save a few) that have ANY numbers of mixed ppm's listed (especially GH 3 part).
I know it sounds like I'm bitching, and I'm completely open to the possibility that I'm way over complicating it. But I've posted this question several times and NO NUMBERS!!
peace:hippy:
-
07-15-2010, 01:53 AM #5Junior Member
Explain to me TDS, PPM, EC...
What do people mean when they say rez?
-
07-15-2010, 03:19 AM #6Senior Member
Explain to me TDS, PPM, EC...
Sorry I sayt rez because I can't spell rezervour. LOL
Some system are connected to a large tank of nutrients to keep all containers to a gravity level. Makes it easier you just check PH.
-
07-20-2010, 03:35 PM #7Senior Member
Explain to me TDS, PPM, EC...
""""" ...Anyway, so far there has been nobody I can find who can shoot from the hip with personal experience a clear answer about the Gen Hydro 3 part PPM's.
I've seen a million grow log's and a billion posts discussing PPM's and how important they are yada yada.... but no posts (save a few) that have ANY numbers of mixed ppm's listed (especially GH 3 part).
I know it sounds like I'm bitching.... But I've posted this question several times and NO NUMBERS!! """""
peace:hippy:
Dude i had the same problem !
Apparently, the people who provide answers are so far along in this
field of science, that they forget what it is like to be a, " new grower ".
Love the knowledgeable ones but it's difficult to get the ANSWERS
( as a newbe ) that we post. It's a communication thing. It's us not them !
Take me for instance ! Most people don't know what the fug i'm say'n even
though we speak English ! Cuz'n the fact i throw in slang lang. It's intended
to be on the lite side ( humor ! ) but they don't get.They can't tell Humor from Fact.... But in time we all get it!
Just keep on keep'n on ! Right, just keep reading, read read read.
Only other trick, where to post, how to post and all the other duedas with it.
All this shitz has fuk me up and will continue to do so for awhile !
So in conclusion, as one of the most knowledgeable posters here said,
" all the answers are already here, yuh, just gotta know how to SEARCH !,"
and speak without fork'Ntongue or something like that ! yeah, more incorrect
word usage from ( you know who ) ZZZZZZZZZZeffer !
-
07-20-2010, 03:52 PM #8Senior Member
Explain to me TDS, PPM, EC...
Weedtree Weedtree's, it takes time emphasis on the word ( time )
looks/sounds like this: time ma ! ! am i just humoring myself here OMG ! i am uh!
butt this is still fun,
Zappa, Rolling Stones, Grateful Dead, fan for...
Life, Liberty and the " Pursuit of Hap Hap Happiness."
Zeffermen
-
07-21-2010, 01:24 AM #9Senior Member
Explain to me TDS, PPM, EC...
General Hydroponics Flora Nutrient PPM Calculator
Daddy
ps, all meters measure EC convert to ppm or TDS by multipling with a factor of either 0.50, 0.65, 0.68 , 0.70, depending on the manufacturer, tis why if everyone used EC for the standard we would ALL be on the same page. kapesh
-
07-21-2010, 03:44 AM #10Senior Member
Explain to me TDS, PPM, EC...
Daddy that calculator is sweet. I wonder if Fox farms has something like that....
Advertisements
Similar Threads
-
Anyone able to explain this?
By GunBarrel in forum Plant ProblemsReplies: 10Last Post: 05-31-2007, 11:41 AM -
Somebody Please Explain.....
By GodBud in forum HydroponicsReplies: 12Last Post: 12-14-2006, 05:34 PM -
can someone explain????
By ande5657 in forum Indoor GrowingReplies: 5Last Post: 08-27-2006, 04:02 PM -
I Can Not Explain What I Have Just Seen
By Trichome Creator in forum GreenGrassForums LoungeReplies: 12Last Post: 12-20-2005, 11:18 PM -
can someone explain to me what this is
By nakedgunner in forum GreenGrassForums LoungeReplies: 31Last Post: 11-26-2005, 05:04 AM