Aloha, ledtime,

DH is the goto guy for meanwell info.:thumbsup:

But, if that "60" is the wattage? No.
6 X 15W. = 90W.
Best to use a 120W. supply for a 90W. load

I can tell ya that the fan is probably 12V. and can use the Red led supply.
I usually just use a cheap 12v. wall wart for the fan so I don't cornfuse the current limit supplies with an inductive load.

I do advise polishing the heatsink to a goodly shine and using good quality thermal transfer epoxy. The life of your leds depends on it.

Now, go beat that credit card like a red-headed stepchild.

Como mai.
Weeze