Quote Originally Posted by DreadedHermie
Dang these human pupils! (Thanks for the warning, I remember your other one.)

Weezard, ready to connect 2 blues to the 60-15. I have it dialed in to 14.78V with no load (except the meter). I don't need to set it running into a resistive load or anything, do I? CV should find a way, right? (I've got the current all the way up.)

Leds are current devices.
Use the constant current setting and the voltage will take care of itself


Wanted to ask about this, too. Do you have it set at 12.6V and current all the way up (the array draws what it can @ that voltage) OR do you also have the current knob turned down so the PS can't exceed that current? Thanks! Hermie
Current locked at 3.4 A. the voltage is set to just below the theoretical maximum for my array. Long toed 15 volts. but it only requires 12.6V. to push 3.4 amps.
Remember this is a constant current supply.