A friend of mine bought one of these $150 and his clones start rooting in about 7-10 days....100% start rate...never lost a clone

Heres a link how to build our own for under $60 Technology Garden Tutorial - Building your own homemade aeroponic cloning machine | Technology Garden


.............................................You will need.............................................. .


(1) Rubbermaid ??Latchables? 50 Quart size Storage tote - Mine has a blue top with clear sides.


(1) Can of spray rubberized undercoating - in the automotive dept
(1) 3/4″ CPVC pipe - about 32 inches or so will do

(1) 2″ Section of CPVC pipe (cut from the length of pipe above)
(2) 3/4″ CPVC endcaps

(1) 3/4″ CPVC ??Tee? fitting

(1) 3/4″ CPVC to 3/4″ Female thread adapter

(1) 3/4 MPT Barbed adapter for 3/4″ hose


(2) Hose clamps, stainless steel for both barbed connections
(1) Set of RainDrip 360 degree Sprayers (pack of 10)


(1) Sunleaves 345 GPH pump (at least 300GPH)
(1) Roll of Closed Cell Foam tape (weathersealing tape) to seal lid
(1) 8-10″ section of 3/4″ Hose
(1) Small Aquarium heater, 100 watt is max - set to 73-75F

(1) 7/8″ speed bore bit for pipe holes
(1) 1 1/2″ speed bore bit or hole saw for cutting holes in top


(1) 1/8″ drill bit(1) 10/32″ tap (creates threads in pipe for sprayers)
VapedG13 Reviewed by VapedG13 on . Tutorial - Building your own homemade aeroponic cloning machine A friend of mine bought one of these $150 and his clones start rooting in about 7-10 days....100% start rate...never lost a clone Heres a link how to build our own for under $60 Technology Garden Tutorial - Building your own homemade aeroponic cloning machine | Technology Garden .............................................You will need............................................... (1) Rubbermaid ??Latchables? 50 Quart size Storage tote - Mine has a blue top with clear sides. Rating: 5