Sorry no pics as yet, ran into quite a heat problem. Grossly underestimated how much heat I would be dealing with since the 1st cabint has a cooltube and this one has zero cooling on light. Creating intake ports to work with a 4 inch exhaust port that I created in the upper back right and mounted a 4 inch inline fan ( home depot $25 ) in front of it with a scrap piece of plywood. Intake ports are being made of 1 1/2 pvc elbows. Got tomorrow off so will shoot pics in AM
tinytoon Reviewed by tinytoon on . DIY Hydro grow Ok I deceided that I will do my log with the DIY stuff I have put together either by reading or thinking of something on my own or combo of both hehe. First we have our cabinet which is constructed of 2x4's and black/white poly. I "pinched" the poly between scrap 2x4 pieces and the frame itself that way the poly didnt tear like it prob would if just used staples or screws. Dimensions are 24"x40"x72" and is open at the top. The top will be covered with activated charcoal filter (which is used by Rating: 5