Now we move on to the "starting" table. 2x4's and plywood make up the table. I took another piece of plywood and mounted 3 fixtures to it and hung the plywood over the top of the table. Lights are hung by 3/16" poly rope and run through pullys that are mounted on the top so the light system can be lifted or lowered to it's desired height. The rope is secured to the side of the framework by using 2 rope cleats (same thing you tie a boat up to at a dock). Lights are 75w 6500k cfl's. Then we have pics of the "volunteers" which are 3rd generation clones. We have 4 Medibuds (left side) and 4 "who knows but smokes good". These pics show them at 14 days old. sorry getting started a lil late on log. To clone I use the same tray with Hydrotron covering the bottom, tray sits on a heat mat which runs 15 mins every hour. They started in 1.5" cubes and sat in smalll netpots on top of the Hydrotron with a dome on. 9 days and they moved into the 4" cubes that they are in now and will be there home. Up untill now all they have had is PH adjusted tap water and 1 drop Superthrive per gallon. Today I will give them a lil present by adding just a few drops of Dutchmaster Grow to the water. I also have found that when watering I have best luck "dunking" the block into a bucket than watering from top of block. This way I can semi control how high up the block gets "wet" and have had much better luck getting roots out the bottom instead of mostly sides. Stay tuned ..... to be continued...... :smokin: