Ok I deceided that I will do my log with the DIY stuff I have put together either by reading or thinking of something on my own or combo of both hehe. First we have our cabinet which is constructed of 2x4's and black/white poly. I "pinched" the poly between scrap 2x4 pieces and the frame itself that way the poly didnt tear like it prob would if just used staples or screws. Dimensions are 24"x40"x72" and is open at the top. The top will be covered with activated charcoal filter (which is used by diff air filter companys and bought at walmart, $10 a box and needed 2) this will act as a filter to help control smell but will allow airflow for heat to leave grow area. There is a small 6" fan mounted at the top which will circulate air down to the plants and will also push air past the light. The light is a 400w HPS/MH fixture. Have 2 plastic storage containers from walmart, 1 for tray and 1 for res, both painted to keep light out.
tinytoon Reviewed by tinytoon on . DIY Hydro grow Ok I deceided that I will do my log with the DIY stuff I have put together either by reading or thinking of something on my own or combo of both hehe. First we have our cabinet which is constructed of 2x4's and black/white poly. I "pinched" the poly between scrap 2x4 pieces and the frame itself that way the poly didnt tear like it prob would if just used staples or screws. Dimensions are 24"x40"x72" and is open at the top. The top will be covered with activated charcoal filter (which is used by Rating: 5