Hey serp, try mounting a bigger plate on the face of your box and get some of those teflon chair leg sliders and mount them to the face of the plate touching the door. Use the threaded tube with lamp repair kits to run wire through for the center pivot then an inch or so above that center tube use a piece of all thread and bolt the top of the sconce through wall to top of box. You will need to slot that top hole the path the bolt will take when you turn the sconce of course. That should stiffen it up but if that falls through then a remote cable is a cinch to run. Hang a bicycle on the wall and run the hand brake cable through the wall. Squeeze the brake on the bike and pop goes the door. Lots of shit has a cable operated mech on it, mower, tiller, snow blower....also can disguise the pull start rope to do the same... weed eater, leaf blower....bolt it to wall n pa-dow.
cannakeeper Reviewed by cannakeeper on . Hidden grow rooms.... I am in the process of building a hidden grow room in a basement. I would love pix of other hidden grow rooms to pull ideas off of that may work with mine as well. I will post pix of mine in a day or so.... I only have a passage way framed in and the hidden door installed as of today. I hope to get it skinned up after Turkey day, then I will start building the veg area then the flowering area in the hidden area. If you have pix of the construction, I would love to see those too.... but Rating: 5