I read the noob grow room setup, very helpful, but I have a few extra variables. I have a 7000 btu AC/Heater, and would like to know how this will effect intake and exhaust. What I would like to do is have the intake come though my 1k cool able light fixture in the bloom room( one side of the fixtrure would be connected to flex duct the other side would be connected to nothing just a open intake.)So the duct would go from light to a T, which would also be exhaust for my grow room. I would put a can fan at the floor level of my grow room which would allow fresh air to go from bloom room to grow room. My inline fan would be after the T and would exhaust through vent in roof already installed. The inline fan is a Quantum 99-mbq325-6 it says 375 cfm at 2.4 static pressure. Am I on the right track, please help thanks in advance. picture 148 is where Ac is going to be installed, 1150 is my back to where ac is, 154 shows vent in ceiling.
nuggiespl Reviewed by nuggiespl on . Vent question Rhizome please help I read the noob grow room setup, very helpful, but I have a few extra variables. I have a 7000 btu AC/Heater, and would like to know how this will effect intake and exhaust. What I would like to do is have the intake come though my 1k cool able light fixture in the bloom room( one side of the fixtrure would be connected to flex duct the other side would be connected to nothing just a open intake.)So the duct would go from light to a T, which would also be exhaust for my grow room. I would put Rating: 5