I have almost completed my new box built from styrofoam. everything went extremely smooth, easy to work with and cut, gorilla glue and long screws held it together nicely. All I am waiting on is my new exhaust coming tomorrow.. temps are a little hot right now with just pc fans (3 intaking, 1 exhausting) but the new fan should work great in conjunction w/ current ones. used vanity fixtures and it is mounted perfectly to prevent cfls from touching the foam. also lined the inside with white poster board and sealed all corners with reflective tape. outside will be spray painted black to help with its slight 'glow.' built a hinging door out of styrofoam and weather stripping with hooks and eyes to apply pressure. all these had to be gorilla glued in

sorry for the paragraph just though id post back with my experience building a box from this material. ill post a couple pictures soon

:stoned:
greenatik Reviewed by greenatik on . New Micro Set-up whats up cann.com - if ya didn't know im just about to finish my first indoor grow inside a PC case. all went well, but I am ready to build a new setup. The box is going to be about 26-30" tall, 12 " wide, and 25-30" long. I was originally going to construct this out of wood, but lack the tools to bore out exhaust/intake holes. So, I decided to give Styrofoam a go. The real thick Styrofoam, which would be real easy, with a sharp knife, to cut out all needed holes. The whole side will open up Rating: 5