Opie;

Sorry to hear abt the trouble gettting into fogponics, I'll post some pics here for you and others. Give the other a try again tho, I'll let John the webmaster know.
BTW the pics above you show in blackstar collars labeled Jesse, is JesseJames who owns Fogponics. (NebulaWest)

Most of the inexpensive foggers are based on "pond foggers" which is fine. Just make sure you get the bouy with it; it is designed to take the ultra-sonic head and float in water. It is the easiest way to keep the water level correct for the head. Also you really need to go to 3-head or more to fill most good size grow chambers, unless you go individual 1-head unit per single plant grow bucket.

Let me introduce you to a frankenfogger machine known as "Fogfognugen"

Uses two types of fog:

1)ultra-sonic dry fog from a Frapaplas Fogger from Plastique Frapa inc
cost is $629 canadian, duty free NAFTA, be prepared to give fed ID # or personnel SS#, you lucky americans.

2)Bete Nozzles PJ-12 impingement nozzle with .012 orifice beatin against a pin size obstruction

I calculate the Frapa running abt 10mins every 1/2 hr, and the pressure misters 3-5 seconds (depending on system pressurization time) every 1/2 hr.

Here are a few pics.