Quote Originally Posted by Testament
Yah, the closets are both seperate .. but next door to each other. So you dont think the ballasts would end up practically touching the plants if I used anything but Lowryders? I have about 10 ft to work with vertically.

TY!!


:rastasmoke:
The Cord From The Ballast To The Socket, Should Be Long Enough, So You Could Get The Ballast Out Of The Closet's.
Ya, You Have 10' To Work With, That's Great!!Roughly 4'-6" Each, Man That's Plenty Of Room!!!,,,,,,If You are Going To Have 1 Or So To Vegging Clones???? It Can Be Even Shorter, Where I Have My Clones Is Only 2'-6" Tall, Work's Great For Me, & There Has Been More Than 12,000 Clones Or Better Gone Through Them, Over The Last 10 To 15 Or Better Year's!!!

But Ya, You Are On The Right Track, Check Out My Grow Shop's In My Sig., & See If It Doesn't Give You Some Idea's!!!.....If I Can Help You With AnyThing???Just Ask????imp:imp:imp:imp:
hatch Reviewed by hatch on . Please Help. (Lighting, Closet Design, Strain Selection) What it do??? I have two closests running right next to each other. Each is 6x2, and about 9.5-10 FT High. I'm are trying to figure out if I could split each closet into two horizantal levels, with approx. 10 plants on each level. This will obviously be a tight fit as far as aisles...So I'm are hoping to find a strain that does not grow outwards as much ideally. As far as height goes, most of the 250s and 400w have ballasts that are the size of texas. if the ballast takes up two Rating: 5