Blower Setup

[Slackersulli]

I just bought a 24VDC Squirrel Cage fan that I wanted to use in a cabinet I'm setting up. It is currently setup to plug into a motherboard for power, but I'm trying to switch it to a standard 120v home outlet. I've found this converter, 24-Volts DC 400mA Power Supply, but it only runs up to 400mA, and the fan I've got can max at 600mA. I'd like to take full advantage of the fan and run it at full.

The adapter is not out of my price range, but seems a little steep. If there is another method of setup that anyone would recommend, that would be great. But if my best bet is to go with the link above, then I may just shell out the cash.

Thanks for any advice.

Slackersulli Reviewed by Slackersulli on 07-05-2008. Blower Setup I just bought a 24VDC Squirrel Cage fan that I wanted to use in a cabinet I'm setting up. It is currently setup to plug into a motherboard for power, but I'm trying to switch it to a standard 120v home outlet. I've found this converter, 24-Volts DC 400mA Power Supply, but it only runs up to 400mA, and the fan I've got can max at 600mA. I'd like to take full advantage of the fan and run it at full. The adapter is not out of my price range, but seems a little steep. If there is another method Rating: 5

[Slackersulli]

I did a little bit more searching and I was able to find this, RESET ELECTRONICS INC - AC/DC Adapter - 24VDC 600mA, Positive, its a lot cheaper, which is good. And it looks like I would be able to just splice the two pieces together pretty easy. It also has a 600mA rating which matches the fan. I'm going to wait a day or so before ordering, in case anyone on here can give me some better advice, but if I don't hear anything I'll probably just shell out the 15 bucks.