Don't be afraid to remove the tube! Tubing is easy to get back on! Just take a cup of HOT water and let the end of the tube sit in it for a minute or so. Softens it just enough to make getting it on easier.

My tube is a bit under 3 feet long. I cut a bit off one day and went to the hardware store. Found a metal rod that just fits- the ring of tubing could slide up and down freely, but with only a tiny gap. I use it as ramrod. Going in isn't too hard, but I use pliers to get it out (mild arthritis in my hands, though, so I wimp out). The tube will still have a little left in it but you end up with some nice "goo".

The glass is cleaned with a bamboo skewer and a bowl of vodka. I evaporate the vodka/oil and add a bit of very dry, sifted pot to make handling easier. Put that in your vape and toke it!

Screens are a drag! But you can put off the inevitable, by using the glass as you would a chillum. Just remove the tube and GENTLY run a flame through the glass when empty. Take a hit, let the glass cool and take another, until the blockage is just gray ash! (If you have weak lungs, you might want to get a friend to do this for you! Bit rough on the lungs, but it will get you high!)

Granny :hippy: