aye captn, its an aero "cloner", what u see in the pics are the my home made sog aero, but the cloner it is not. Everything except the pump is new on this setup, and the pump has been sterilized and a half.

Water in cloner and water in the sogger is both the same, from 5.8 to 6.5, the initial water has a ph of around 7.8(tapwater).

Removing the dome, well, the dome is removed from the initial cloner, however the room they are in aint very ventilated so the room itself might work as a dome.

But ill try as suggested at first, ill put the dome back on when i put em in flowering(atleast when i move them to the flowering room), turn the lights down a tad(using a 400w mh from even further away) and we'll see if that does the trick.

But atleast you've confirmed that they look perspirated, too much heat etc. Right?

Incoherent english is my specialty.
cyberwax Reviewed by cyberwax on . help! problems with wilting Hello, Been plagued by issues lately with my grows, lately i've been experiencing troubles with going from clone(45w) to flower(i only use a 600w for starters), they wilt, each time the light is on they wilt more and more. But when its been dark for a period they are right back up there with the best. So the question is how is it best to harden the plant into the new enviroment? As everything else is more or less perfect, atleast compared to the veg room, only real difference is the light, Rating: 5