Quote Originally Posted by physicsnole
Ok so im thinking wither ebb and flow or dwc. dwc sounds easier but also requires more maintenance (i could have a water valve open up and drain the bucket so i can refill..) than the ebb and flow. but im also looking for which system would grow faster and stronger plants (ive read thats where dwc comes in). i want a system that requires almost no cleaning/flushing (if possible). any ideas????
Go Aeroponic's in the PVC, on each side of the site, drill 5/16" hole, about 2 1/2" from center of site. Take the 1/4" tubing, put it through the hole you just drill'd, push it through so you can pull it through the site, srcew a mister on it, & pull the slack you pushed in back, so the mister is at the top of the tube, upside down.

It will be out of the way of the root development inside the tube. Take the other end of the 1/4" tubing to the feeder bar, & start setting up the next one.

Maybe this will give you some Idea's:wtf:imp:imp:
hatch Reviewed by hatch on . enough room for roots? Hey guys I have a quick question about my future hydro setup. It is inside a computer shell, and i am going to use lowryder and LED lighting (see signature for more info). the roots are going to grow im a 2'' pvc pipe. the pump is the section with the cord (there is also going to be an aeration pump for the res, just not in the drawing:stoned:) should i use a basket with grow medium and let the roots freely grow in the pvc (meaning no pellets in the pvc) or should i have pellets in the entire Rating: 5