cleaning a grinder

[kingkeef]

a toothbrush works good too!

[jdsoil]

I have the same grinder and had a screen problem just like you. Scrape it until your happy with what you get and then when you want your screen spotless soak it in rubbing alcohol for an hour. You can watch the crap come right off the screen.

[one.stoned.wookie]

the way i do mine once it gets caked like that is this. i take my grinder put it so i can see the threads and there is a C type ring in there i get a small jewlers screwdriver stick it down in there and pry it up and the ring comes off.then u should be able to push screen right out. do this very gently dont warp the screen then soak everything in alcohol shake up realy good but do not dump that alcohol put it in a flat bottom glass dish and you can recover all the reallly stuck on goodness........mmmm hash oil! good luck

[dewthedew]

crispi I also a nickel in fact I keep 2 nickels in my grinder:smokin:

[doc holiday]

I use a small paintbrush for the screens, and used to keep a guitar pick in there for the kief. now i've got the fancy space case pick (:
if you need a deep clean and don't care about wasting any kief, go out and find yourself one of the bottles of compressed air for keyboards and stuff. those work great.

[420Dank]

what i do is cut a bottle in half. unscrew the top, put it in ur mouth (you looking down) hold the screen section of the grinder under the bottle like inside of it since its cut in half. place flame 6 inches below the screen and just watch all the smoke rice up to ur mouth now inhale!!!

thats what i do when im outta rope and my grinders full of jewels.

[415plus5]

what i do is cut a bottle in half. unscrew the top, put it in ur mouth (you looking down) hold the screen section of the grinder under the bottle like inside of it since its cut in half. place flame 6 inches below the screen and just watch all the smoke rice up to ur mouth now inhale!!!

thats what i do when im outta rope and my grinders full of jewels.

i would have never ever thought of that. ever. period.

[Henline]

When i clean my grinder i take it to the max, i will first get a paper clip and go in all the cracks and screw attachment part and scrape it out good, then, open up all the compartments, and find a flat clean surface and hit it down on it a few times just make sure to hit it hard enough, ive done this many times and i have got a lot of keif this way when ive been disparate

[headshake]

soak it in a bowl of 91% isopropyl alcohol. let it sit in there til it is sparkling clean. i used an old tooth brush to get all the nooks and crannys. then just make hash with the goodness that came off of it!


-shake

[214texasmade]

I think this is the way to go, the easiest way!
Cleaning the screen on your grinder, to get the most kief possible for hash. - YouTube