Ya'll all have great point's.. If I may add?? Aeroponic's is really not hard at all!!!
The same principal's are like anything, stay on-top of your PH, use liquid nut's, go by the chart's with nut's for right ppm.
I use the 2" basket's and 2" rapid starter plug, from start to finish-That's all, no medium.
Use a good pump atleast 1000gpm, For best mist, use inline filter's and sceen's on intake of pump, keep res. well oxygenated with air pump's and stones.
My Pod's drain into a big res., and don't have standing water in them, But some system's do.
I also use net's, for plant support, First net at about 10" to 12", and it's real easy to lift the lid @ check the mister, all my plumbing has scew end's if need a repair?, In the Pod's I have 7 Mister's in each Pod-(16"x24"- clone Pod's are 9" deep and the veg @ flower Pod's are 16" deep), the mister's are on riser's so the mist hit's the top of the basket's and drain's down the root's.
Hope any of this can help!! and to keep the price down build your own!!! If you would like I can show you how to build your own? Don't be scared jump in with both feet that's how you learn!!! Anyway that's my 2cent's and if you want some help, It's No Problem!!! Later

P.S. Hope this didn't piss any-one off!!! Just tring to Help!!
hatch Reviewed by hatch on . Starting Aeroponics, what do you think? Ok so I've been talking alot with the guy at the hydro store about building me an aeroponics setup I can use in my 4x4 foot table. He is going to build me a top insert that will hold 16 plants in the table in 4 rows of 4 with 3 spray bars between the rows. Each spray bar will have 3 sprayers for a total of 9 sprayers below. So all spray bars and plumbing runs on top of the table. Just the top aeroponics part of the table and the water pump will cost 300$ with a filter too, I already Rating: 5