Ok, I think I got it figured out. I'm going to build the box about 30"x30"x 5'. I'm painting the inside flat white and caulking all the inside seems for light proofing. I'll have the 4" active outake with a computer fan and the 2" passive intake, using black abs pipe for light traps at all the holes, (caulking around them as well) For the lights, I'll have 4 40watt cfl's hanging down for the veg, then I'll have a 400hps on the top and 4' fluorescent tubes on the three walls of the cab, not the door (not the door). Home depot has some natural light indoor plant tubes I figured would be good. I'll probably also have a fan blowing over the plant along with the other ventilation. I'll be posting pictures when this all starts, it may be a little while, but it's definitely happening Again, any further input on my ideas is appreciated thanks!
KaliGreen Reviewed by KaliGreen on . Lighting question for growbox setup?? Need Help! Hey guys, I was thinking about putting together a growbox about 2' wide by 2' deep by about 4' high. I was thinking about getting a 125w HPS on the canopy and then either 2 cfl's on each side of the plant or a 2' fluorescent tube light on either side. I would have a 4" active outake at the top with a 2" passive intake at the bottom, probably use a little computer fan or something similar for the active out take. I was just wondering if this would be sufficient for 1 or 2 plants, and if I did Rating: 5