UA / Quick Fix questions

[lordertai]

Hello everyone, i have been lurking for about a week or two now because i have a UA coming up for a really good job. I have been a habitual pot smoker for years, smoking at least a few bowls every night. And anytime we dont have, there is always enough resin to get us by. :jointsmile:

Well i've been doing my research and came to the conclusion that my best way to pass the test is with Quick Fix. I havent smoked in 4days and my test is about a week and a half away, so while i was trying to quit and clean myself out, im realizing that i dont have enough time. I have been reading so much conflicting information about this subject that im starting to stress out over it. I weigh about 150lbs @ 6ft and Im really skinny with a very fast metabolism (i cant gain weigh even if i tried ;p). While it may still be an option to naturally clean myself out with exercise and fluids, i would much rather continue smoking and use the Quick Fix. :smokin:

As for the test itself, it's for a union job and i know im going to be tested by Quest in an onsight lab. With results before i leave that day. Since i will be working on site that day, im not sure what time of the day i am going to be tested. So my main concern is how long after warming up the Quick Fix (and securing the heatpack) will it stay in the desired temp range? Im sure there is a place on site (in the lunch area) where i can get to a microwave, but even then there may be up to a 1hr wait before i get to drop the urine. Also im concerned about carrying the bottle in my pocket and if they ask me to empty my pockets, etc. Also with the size of the bottle, would it be noticeable in my pocket or not.


I would also like to know the self life on a box of Quick Fix, and if there is a chance for a bad/old sample. Just incase if i were to buy some for the future, can i hang onto until i needed it.

Feedback appreciated! :thumbsup:

lordertai Reviewed by lordertai on 01-22-2008. UA / Quick Fix questions Hello everyone, i have been lurking for about a week or two now because i have a UA coming up for a really good job. I have been a habitual pot smoker for years, smoking at least a few bowls every night. And anytime we dont have, there is always enough resin to get us by. :jointsmile: Well i've been doing my research and came to the conclusion that my best way to pass the test is with Quick Fix. I havent smoked in 4days and my test is about a week and a half away, so while i was trying to Rating: 5

[lordertai]

planning on purchasing some Quick Fix tonight on the web. Alittle feedback would be GREATLY appreciated. :hippy:

I continued to Google search late into last night and found that if i just attached the heating pad to the side of the bottle that i wouldnt even need to heat it up with a microwave, it would just take about 1hr to get up to temp. That may be the better route for my situation. My next real concern is how i can conceal the bottle so it doesnt look like there is a buldge in my pocket.

Also has anyone been padded down or asked to pat their pockets down from the drug tester? If anything i will make a holster for the side of my leg or something...haha. I gotta do what it takes to pass this UA.

I just cant believe some Junkie heroin or crack addicts can get away with some fluids and a day or two, yet someone who smoke pot a few times a week could take up to a month. If anything this UA system is making the workforce a worse place by allowing those people in. Most potheads i know are pretty intelligent bookworms or musicians.

I'll do what it takes to fuck the system... and if i can smoke up to my drug testing day and pass with quick fix... then that would be supreme. :rastasmoke:

PEACE!

[killerweed420]

In my experience If you nuke it for 10 seconds and stuff it behind your nut sack it will stay 94-96 for a couple hours. I would wear 2 pair of tight shorts to keep it in place.
You will normally be asked to remove any jacket and empty your pockets. SO you could have it in a pocket with a heat pad till you get notified and then move it to yuor crotch. If you do that you'll need more heating pads if it takes a while. The Dollar Store in my area has cheap pads that can heat the sample in about 10 minutes. Remember these pads can only be used once,the quickfix can be reheated many times.QF is usually good for atleast 18 months.

You could be a good candidate for getting clean in the allotted time. You would need to buy some test strips to test yourself.

[imitator]

As killerweed said, 10 seconds will bring the bottle up to around 94-100 degrees, which allows you to then stuff it in your crotchal region and keep it near that temp for a few hours.

With the heating pad that is included in the package, you can sustain that temp for even longer, or use the heating pad to heat up the bottle if you have about an hour's worth of time.

I have never been patted down for a drug test for employment, never been watched, and never had any problems using substitution via QuickFix outside of temp problems. If the liquid isnt within the proper temp range, they will make you piss again(which is not what we want, since all our clean liquid is in the cup they have in their hand), or fail you. Ive only had one friend who got failed due to temp, most of them are told to piss again, but thats pretty much the same thing as failure anyways.

Best thing to do is to do some practice runs. You can heat/reheat QF plenty of times without it damaging it at all, so do so. Practice heating it up to proper temp, and practice crotching it, so that you feel comfortable with the entire process. I usually use a pair of whitey-tighties and then a pair of boxers overtop, works great for me.

Once you feel you have the entire system down, including removing the bottle, and putting the bottle back in without making any suspicious noises, you should be all set. The only thing you will not have practiced is attaching the heating pad to the bottle, but that one really doesnt need much practice.

[christizzle]

Everyone agrees that Quick Fix can be the best way to go! My question is that I read on the internet some labs can detect fake urine. Is that possible? Or is Quick Fix one of top quality?

That is my only concern. I could get a friend's but it seems messier and Quick Fix is just so affordable and sounds to easy...

[imitator]

QuickFix is on version 4.0 iirc, and the reason that is, is because the other versions had been able to be detected by labs. And they offered anyone who had the 3.0 the ability to exchange it for a bottle of 4.0 for free.

The current version of QuickFix is not detectable, it is rather cheap, and is a wonderful option for those interested in a surefire way to substitute.

[SaRaH000]

the quick fix is completely undetectable..thats why they come out with new versions of it every couple of years..they keep up with the labs. Ive never heard of the Fix being detected. They have more information on their website too urineluck.com It will tell you what formulas are current .
As far as if they check before you go in..they cant check you or watch you for an employment test. You should be good.

[Burnt Toast]

As long as the QF batch is not more than 18-24 months old, or it hadnt been exposed to direct sunlight, it will not be flagged as a "non-human" sample.

Look on the instructions sheet inside the box. On top of the sheet is a batch code, which translates the date of manufacture. The QF shelf life begins on the manufacture date (not the date of purchase).
As an example: F1B08 = Jan 2008

If you still have doubts about your QF batch, you can always order a few test strips and test the batch to ensure that the creatinine, pH, and specific gravity are all within acceptable levels.

These strips can be found by doing a search for drug adulteration test kits on google.com.

At the collection center, the collector may have you remove jackets and have you empty your pockets. The collectors cannot frisk or otherwise touch you in any manner. The only exception to this is if the test is for court-ordered probation in which the person has relinquished all the rights normally enjoyed by persons taking a drug test for employment.

Hope that helps a little
:smokin:

[SaRaH000]

Im with burnt toast on this one. The only thing is they dont go by batch number, but by formula number, which the current is 4.0 i think. Check on the website, it states it there

[Burnt Toast]

Im with burnt toast on this one. The only thing is they dont go by batch number, but by formula number, which the current is 4.0 i think. Check on the website, it states it there

I've used, tested, (and/or exchanged) many batches of the Quick Fix since 2002. Theres a formula number and a batch number.

The formula number is printed on the bottom flap of the box, the batch number is printed on the instructions sheet located inside the box. As I already stated, the batch number is used to determine when that particular batch was manufactured. The 18-24 month shelf life begins on that date of manufacture. You do not go by the formula number. Formula 4.0 has been in existence since late 2003.