Okay they are definately stretched from floros but i don't have access to anything within a 3 hour drive for any of this stuff for the grow. The next grow will benefit from close CFL seedling/sprouting grow to 400watt MH Agro-max veg period followed by the 400watt HPS bloom. But currently I am just picking up mid grow.

The 6 plants are definately all females so I would at least like to save all of them so i can clone them.

Bone meal is just like sand only it feels a lot drier. It was used to airate the Miracle Grow soil from Wal-mart. The pots are 5 gal. but I filled with 4gal of Miracle Grow pre-fert soil (i know but there were no organic ones available) and then i added 1/2gal. of bone meal and mixed well. Oh and there is 1/2in. of small white pebbles on the bottom for runoff which has worked well the entire way through vegging.

I started with Miracle Grow nutes from the beginning. I since bought the HPS light and Dutch Nutes at this hydroponics store. I mixed following the directions on the bottle which is right in front of me now...here is what it says:

Miracle Grow All Purpose Plant Food (Used Day 1 - 59)
15-30-15
Total Nitrogen: 15%
5.8% Ammoniacal Nitrogen
9.2% Urea Nitrogen
Available Phosphate: 30%
Soluble Potash: 15%
Boron: 0.02%
Copper: 0.07%
Iron: 0.15%
Manganese 0.05%
Molybdenum: 0.0005%
Zinc: 0.06%

This was mixed 1tsp per gallon of water which I did. Used it every 3rd time watering during veg.

DNF(GRO): Dutch Nutrient Formula Gro (Used once so far on day 60 because it was the first day of 12/12)
Part A: 2-0-2
Total Nitrogen: 2%
Soluble Potash: 2%
Calcium: 2%
Part B: 0-1-3
Available Phosphate: 1%
Soluble Potash: 3%
Magnesium: 0.50%
Molybdenum: 0.0011%

It says directly on the back of the bottle that for plants already established in soil to add 1/2tsp of PartA and PartB into 1 quart of water. I had put 1tsp of PartA and PartB into roughly 3/4gal. of water. Now I did water each plant with 300ml of this mix on day 60 when the meter said dry. I realize this was too much. I guess I was figuring a grow spurt or something since they were going under 400watt HPS light and 12/12 light cycle. Anywho...that's the fert stuff.

As for temp I was worried but I had a really good desk fan shooting air at the bulb. Temps were like 93 degrees F during light hours. I kept the door to the cabinet open all day today so keep temp down to 84 degrees F. I foilage sprayed them today with spring water and they absorbed it within a few minutes. At night during dark hours the cabinet is closed with the fan still on and temps are about 75 degrees F.

Ventilation might be my problem with the heat. I mean I have two 2in. inlets and the doors glow when the light is on so there is plently of air coming through the cracks i thought. And the ambient temp of my house is like 74 degrees F sometimes colder.
I was thinking of cutting a 8in. diameter whole in the back bottom of the cabinet and setting the desk fan right next to it to draw air in from the outside. Cause right now I think the fan is just throwing around the hot air that is already in the cabinet.

I won't be feeding them any nutes till I see some sort of major recovery. I only feed them spring water from the store which is like neutral pH I would assume. My tap water sucks.