BRO! i just cloned my outdoor bitches and I was wondering if you could give me some advice (or anyone) on my setup, and how I did it.

Took a razor blade out with me and cleaned it with alcohol, as well as a small cooler and a container with R/O. the water was nice and cold and the cuttings went straight into the water. came back fairly quickly (took 45 minutes) and stuck them into the fridge as I laid out all da materials.

I bought Dip-N-Grow (no olivias at the hydro shop) and a large tray and dome. Also decided to give coco a shot since that is my final medium. I have two different types of coco. one is really coarse, and one is very fine. 1/2 are in one 1/2 are in the other. Both were rinsed well to rid salts

packed all the cells in the tray with barely moist coco, made nice holes w/ a screwdriver, and went to work on the clones.

made a new cut farther up the stem at a 45, slightly scarified, and pricked off the lowest leave(s) next to the cut. swirled them around in the dip n grow (not sure what the correct dilution is here.. it had different levels for different plant types) for about 5-10 secs, and placed them as far as possible down into the cell. packed coco around stem for support

the weird thing is that the dome (got for free from hydro guy) had two holes in the top, made by him, and he said that they help, I just have to mist a couple times a day?

they are only under 1 27 w daylight cfl at the moment, adding another tonight.

anyways, i probably wont have great success, but I tried to do everything by the book, and if there is ANYTHING anyone can suggest or criticize please do

thanks thanks thanks