Quote Originally Posted by Weedhound
Hey Flame...

Ok...ive tried it....twice. Unfortunately I simply cannot get around the capsule filling part. The first time I tried using a syringe to draw up the oil part and ended up spilling ALL the oil and lost it....so made capsules from the residue that was left. So far.....a nice head high, not much body high but I can't make a true judgement from them based on my doing it incorrectly.

The second time the oily paste did something to the capsules so that they not only ended up too greasy for the tops to stay on but the oil also created some sort of suction to the capsules so I couldn't get the pieces out at ALL. I lost the entire batch AND my capsule machine which is now full of gooey crud and stuck capsules.

Flame....I love you man. But without another way to store and take these things I'm afraid 3 grams of good bud and a capsule machine is all I'm willing to sacrifice here.

I'm VERY bummed that I'm so stupid I can't get this figured out but I suppose it's par for (my) course. I've thought about putting it on a plate like you said but after 5 hours of cooking I just don't even want to think about it anymore.

Sorry I blew it.....
Oh man, I'm gutted for you weedhound, absolutely GUTTED!

Firstly, next time your in the UK (or Amsterdam when I'm there), I'll personally replace your weed, and that's a promise.

Secondly, don't be discouraged. One thing that's come out of it (for me anyhow) is that we've now learned that the residue should be kept and used. So at the very least you can be congratulated for pioneering that discovery.

Thirdly, I'm going to thoroughly troubleshoot this part of the process so hopefully nobody else will come 'unstuck'.

OK, here goes:

1st Method

Part of the reason for using an egg cup (or small coffee cup etc) to simmer the oil is because the narrow shape means that the oil is a centimetre or two deep with the residue on the bottom.
If the cup is wide you only get a few millimetres depth, and when you try to syphon the oil up in a syringe it blocks with the residue.

When syphoning up, I just barely dip the nozzle in a couple of millimeters and start drawing up the oil, when you get near the bottom it may stick, if it does, squeeze a little oil back in the cup and keep trying. You'll always be left with some that will need to be carefully scraped out.

N.B. The diameter of the 00 capsules is about 7mm so the size of the handle on your coffee stirrer (or whatever your using) needs to be smaller than that so you can dip it straight into the capsule without touching the sides. One of the ideal scrapers that most people will have in their houses is a pen top (see picture) the shape is ideal for scooping up small amounts of oil and residue and tipping it in.


2nd (Alternative) Method

OK, this part is for people who want to try a COMPLETELY different approach. Instead of trying to 'suck up' the oil with a syringe and medicine dropper, you can use a variation of a cake decorating method, whereby you simply pour your (cool, but still liquid) oil into a piping bag and gently squeeze it out through a VERY FINE nozzle* (see pictures).

I've included a variety of pictures to give you an idea of what I'm talking about.
N.B.The critical thing to remember is to go for one with a very narrow nozzle. You don't want your oil running or dripping out before your ready when you pick up the bag, and you need the nozzle to fit inside the capsules so it doesn't go everywhere when you gently squeeze the oil out and into the capsules.
You could put a little sellotape on the end and make a small-ish hole in it with a pin if the nozzle seems to big.

The price of these things run from about $2 up to about $20 (£10) for the 'all-singing-all-dancing' varieties.

D.I.Y Method

If you want to try making your own capsule filling device, take a large-ish 'baggie' or other small plastic bag, pour in your oil, and when your ready to start filling, make a small 'nick' in the corner and carefully squeeze out the contents into your capsules.

I hope this makes sense, I'll try filming the process and posting up the video at a later date if people might find it helpful.


P.S. weedhound, to get the (now solidified) oil off your capsule holder and syringe, use hot soapy water (washing up liquid works for me!).

p.p.s. Was your oil still too warm for the capsules when you put it in?