Results 1 to 10 of 34
Hybrid View
-
10-22-2007, 12:10 AM #1
OPSenior Member
Does this look ok?
What I used was one of those shoe box sized storage containers.
Originally Posted by thex420
I went to lowes and bought 4 bulb sockets and 4 Y splitters. I screwed the sockets into the bottom of the storage container and wired everything inside the box. a total of 14 inches of wire in box total and connected directly to the plug which plugs directly into my power strip. I will find the pics of what I bought and post them and also post some pics of the final project. If you have any other questions let me know and I will help you make one. There really cheap and work quite well. I have a totoal of around 16000 lumens and that is with 4 sockets you could add more sockets if you wanted. or even get bogher bulbs. Watch the heat though they create more heat then you think they so. I put some breather holes in the top after it was finished and also cut out the short sides of the container. so theres come air flow. I don't burn the plants and also don't build up heat.
I also made up a diagram for you so you see how i wired the homemade hood.
Just check the pics and you will see what I did.
I will add another post to show the individual parts used.
What I did was had a 8" extraction point and 4 - 4" intakes. 2 on each side of the box. and one with a blower that is 5 inches.
Originally Posted by Slackersulli
So 5 holes in one out. Temp is a LOW - 72 HIGH - 79pudder Reviewed by pudder on . Does this look ok? I started working on a grow box well cabinet that in all costs around $200. I have pictures to go with it. contains: 8 - CFL compact fluorescents 23w 100w equivalent 2700k 4 - CFL fluorescents t8 tubes 17w 75w equivalent 6400k 2 - CFL fluorescents t4 tubes 8w unknown equivalent 3100k need to work on air flow next. have to have doors open and fan on them to keep cool enough. Don't want dead plants ya know. Cabinet is also being used for all storage of nutes, spare bulbs, soil, Rating: 5










Register To Reply
Staff Online