Activity Stream
227,828 MEMBERS
11304 ONLINE
greengrassforums On YouTube Subscribe to our Newsletter greengrassforums On Twitter greengrassforums On Facebook greengrassforums On Google+
banner1

Results 1 to 5 of 5
  1.     
    #1
    Member

    EC x 700 or EC x 500

    I just received my trechion Cf meter that reads the EC and ppm but it has two break downs. One is EC x 700 and the other is EC x 500 Can someone tell me which reading I should be going by.
    Pinner Reviewed by Pinner on . EC x 700 or EC x 500 I just received my trechion Cf meter that reads the EC and ppm but it has two break downs. One is EC x 700 and the other is EC x 500 Can someone tell me which reading I should be going by. Rating: 5

  2.   Advertisements

  3.     
    #2
    Member

    EC x 700 or EC x 500

    Maybe I didn't ask the question right because I'm not getting any help here so I'll try again.
    When I'm trying to find out what the ppm in in my reservoir is
    My CF meter gives me two readings. One is by EC x 700 = ppm and the other is EC x 500 = ppm If my EC is reading 0.6 which calculation do I go by when I'm checking my nutrients. I'm trying to follow what others done in their grow log for example if someone post that during 1st week of veg the nutrient ppm should be between 800 and 1100 ppm. The difference between the two calculations ( x 500 or x 700) is a difference 240 ppm. I hope your following me because I'm totally without knowledge on which formula to use to check my nutrient strength. I don't want to over feed or under feed my plants so some help on this would be appreciated.

  4.     
    #3
    Member

    EC x 700 or EC x 500

    Ok I found it out myself so here it is.

    There are three conversion factors which various manufacturers use for displaying ppm's...

    USA 1 ms/cm (EC 1.0 or CF 10) = 500 ppm
    European 1 ms/cm (EC 1.0 or CF 10) = 640 ppm
    Australian 1 ms/cm (EC 1.0 or CF 10) = 700 ppm

    For example,

    Hanna, Milwaukee 1 ms/cm (EC 1.0 or CF 10) = 500 ppm
    Eutech 1 ms/cm (EC 1.0 or CF 10) = 640 ppm
    Truncheon 1 ms/cm (EC 1.0 or CF 10) = 700 ppm

    So when someone submits a grow log it would help to state which type of meter they're using when they state their CT or PPM

  5.     
    #4
    Member

    EC x 700 or EC x 500

    Your post did help me. I'm a newbie, have never posted but have just sat and read for hours until now. This was one topic I really was in the dark about, and it's good to start out with this tid bit instead of finding it later...

  6.     
    #5
    Senior Member

    EC x 700 or EC x 500

    The 500 scale is for U.S. The 700 scale is for Europe.

Amount:

Enter a message for the receiver:
BE SOCIAL
GreenGrassForums On Facebook