just made cfl light fixture

[texas grass]

heres a cfl fixture i just made up out of an old 1000 watt hood



When hooking up in parallel, all lamps must be the same voltage but not necessarily the same type. You could use lamps that draw very little current with lamps that need high current, however the voltage supplied will need to be the same as the total of the individual lamps. As in series, you can use as many lamps as you need, but you need enough current (AMPS) to drive all the lamps you are using.

heres the bong im always hitting:stoned::thumbsup:
hope this helps people hook up lamps

i used the middle parallel diagram

texas grass Reviewed by texas grass on 09-11-2007. just made cfl light fixture heres a cfl fixture i just made up out of an old 1000 watt hood When hooking up in parallel, all lamps must be the same voltage but not necessarily the same type. You could use lamps that draw very little current with lamps that need high current, however the voltage supplied will need to be the same as the total of the individual lamps. As in series, you can use as many lamps as you need, but you need enough current (AMPS) to drive all the lamps you are using. heres the bong Rating: 5

[texas grass]

just lit it up and so far so good:jointsmile:

whole lot better lighting than the other fixtures

time to finish bongin around :stoned:

[killerweed420]

Looks like it should work good for small grow.

[stinkyattic]

That's cool. Add a couple tube flouros to that beast too and it would be even cooler!