What SmokeNChoke said is correct and it would appear that you have cut the black wire and inserted the control in the middle of it. Now, Hook the black wire from your cord to the black wire's lug, the white wire from your power cord to the blue wire's lug and the green wire from your power cord to the Yellow green wire's lug. (Of course I mean to connect to the empty lug adjacent to the wires.)

Give your wire connections a few real good tugs to make sure the connections you installed are tight and won't pull apart. If they are tight, wrap with black tape well onto the wire - you don't want the connection exposed like it is now. If they aren't tight and will pull apart, get rid of those crimp connectors and get screw on wire connectors.

Good luck! :thumbsup:

PC :smokin: