Attic setup would this work PLease check out

[PharmaCan]

What type of material would be the best insulatorl, I was thinking about 5/8 plywood and then 1/2 Sheetrock on the inside. then putting some sort of insulation on the outside. Or should I just use the plywood with Black and white plastic stapled to the plywood any help would be greatly appreciated. Thanks

Personally, I would frame walls (build walls from 2x4's) and work from there. Then you could insulate the walls. So, going from inside of the growroom to outside you would have plywood, framed wall with insulation, drywall.

If you aren't a very good carpenter, use steel studs & track. You can fuck up with that stuff all day long and all you have to do is revese your drill motor to correct your mistakes.

Before you do any framing, decide what you want to do about a/c because you will probably need a hole for an a/c unit, or for a vent, built into the wall.

PC :smokin:

PharmaCan Reviewed by PharmaCan on 08-04-2007. Attic setup would this work PLease check out I would like to set up a grow room in the attic from my research the temps seem to be the biggest problem. I would tap in to the my central heating and air supply for the intake and run the exhaust back to the return air. I look at it like adding an additional room to the house, just in the attic. I would first use plywood 5/8 and just screw to the rafters then on the inside possibly sheet rock or use the white/black plastic and the outside put insulation. Do you think my temps would be Rating: 5