actually, what i've found to be the best scraper is a piece of a coat hanger. go get a wire coat hanger that is not too thick and a pair of wire cutters. next cut the wire towards 1 of the ends of the long part. then cut it again 5 inches down. take that 5 inch piece of wire and make a small bend on 1 end to make a scraper hook thing which you can reach to the edge of the insides. if you use this it will be easier to scrape the resin off the tool. hope this helps.
couplescaddy Reviewed by couplescaddy on . resin question i bought a glass pipe from my friend yesterday its really nice. I dont think he ever cleaned it. I was cleaning it with q-tips and rubbing alcohol there was tons of resin on the q-tips. could i cut off the cotton part of the q-tip and smoke it with the rest of my resin. This is my second time actually collecting reson Rating: 5