A little change of plans. After consulting my local grower, I have been instructed to go from the two 400's to a 1000 HPS. Also, to have a 200 CFM squirrel fan in place of the passive intake. He said I will need to bring air in with this type of set up, and with this many full size plants. Also that in the middle of the two 400s, where they cross, it would be a good amount of canopy penetration. but around the sides it woould be horrible. With the 1000 watt I will have sufficient canopy penetration and good over all spread of the 6'x6' area. Thanks for the comment, i hope it will be a successful grow. Im looking for about 3-4 oz per plant, and so im wanting a over all harvest of about 32 oz dry weight. Do you guys think this is possible to achieve with these strains and this set up? laterz..


picilo
picilo Reviewed by picilo on . 9 bucket DWC grow room So I am building a grow room and I wanted to get some out side input on it. Any suggestions with reasons on why you think I should make that change would be greatly appreciated! here gos... The Room ---------- The veg and flower room will be one chamber that is 6'x6'x7'. I use 2"x4"x12' from the local HD. Its just a simple structure that has a bottom and top frame with 4 posts on each corner screwed in to the 2x4s. I then take panda plastic and use a staple gun from the inside to create Rating: 5