cool homemade

[stonerman07]

ok so i have a glass bowl, and i want a piece that involves water. so i took a fanta bottle, and heated the side up. i pushed a bic pen through the hole. i put tape near the top of the bic pen for an airtight seal. for the stem i put a socket on the pen and put a pebble in the pen to keep the stuff from falling out of the bowl. i cut the top of the fanta off and put tape over the edges to smoothe it out. the stem works as a slide. i would post some pics, but dont have a camera. do you think this will work good? dont have bud to test it.:rastasmoke:

stonerman07 Reviewed by stonerman07 on 07-04-2007. cool homemade ok so i have a glass bowl, and i want a piece that involves water. so i took a fanta bottle, and heated the side up. i pushed a bic pen through the hole. i put tape near the top of the bic pen for an airtight seal. for the stem i put a socket on the pen and put a pebble in the pen to keep the stuff from falling out of the bowl. i cut the top of the fanta off and put tape over the edges to smoothe it out. the stem works as a slide. i would post some pics, but dont have a camera. do you think Rating: 5

[BlazeBoy]

I made one very similar to that with a powerade bottle. And yes I got totally blazed off of it.

As long as there isnt any plastic gettin touched by the flame it'll work just fine.

[wicked]

Just make sure its air tight and it should work fine.