This is off subject a little , a swamp cooler going out not in.
I used a swamp cooler to suck out the air from the room. The grow was at the beach in So. Ca.
I was growing thunderfuck and the smell was out of this world. Like a skunk in the Texas sun.
I used lysole (liquid cleaning solution) in the swamp cooler resivore. One day it ran out of Lysole (sp) and you could smell it 4 houses away. Do not use the perfume stuff as that is a dead give away to the cops.
I have alway grown next to the beach and always had the problem of RH . As with any grow good air movement does the trick.
With co2 induction you always need air movement in all directions , making sure you have one on the floor going up to move the co2 in the air as its heaver than O2 and N2 80/20
I use a ac unit at the end of a bloom cycle to drop the temps to help kickin the tricomes and like a night time temp of 65 d.f.
Using a computer to control the cycles of light,co2 controler, fans, venting, flood and drain. Makes it easy control program relayrunner is real easy to use.
oldsanclem Reviewed by oldsanclem on . Need Help with HEAT. Where i live is very hot during the summer. I mean really hot, like 120F. for a month hot. When it is this hot, my house is about 85F inside. Now I have a 5'X5' grow room, with a 400 wat HPS and 6 42 wat cfls, and a t-15 tube light, with good venting, but if I am pumping in air at 85F, how do I keep it below 85F with out killing my wallet? I saw a small swamp cooler at Lowes for $250. this would help also with the humidity, it goes at about 30%. Any ideas on a way to keep this room cool with Rating: 5