Quote Originally Posted by Jimbob1310
alright my best indication is that it would require cold to cure seeing as heat will vaporize the THC and melt the paper lol. so im gunna try that, and i really like your flour idea, although i wasnt planning on sticking them in a book its defanitly something i shoul consider doing anyways to see what works.

im gunna get started on this tonight, i would like to ask though, are there any honey oil tutorials on here? all mine is gross and hard lol and i cant use it. thanks!
DO NOT DO THIS IN YOU RHOUSE OR A CLOSED ROOM, DO NOT DO THIS ANYWHERE NEAR SPARK OR FLAME... DO NOT SMOKE DRUING THE PROCESS... YOU CAN LITERALLY BLOW YOURSELF UP... (i have to add my warning... with proper caution it's completely safe, but if you ignore saftey, of course you can end up paying some ultimate price... a limb or your life... so just be careful.... if you're doing it anywhere near anyone (i had a friend around) stress how no playing, no sparks or no flame sources is extremely important... like i said, safe when done safely, deathly when ignoring the saftey...

there's a couple actually, both are the same, just the device that holds the weed differ....

one, get a bic pen, hollow it out, (gotta have to ends, the coned ones...you know the writing side) grab a can of butane (only one i know for sure is safe [some have additives] and put a lighter to the tip of the end to get it nice and soft, then push the tip of the butane in it (without actually discharging the butane) so it's the right size... stop it about half way in (so the tip will have something to push against, to discharge the butane)

now, take that pen, put one tip in it (the one not modified) and pack weed in the pen as tight as you can (the finer grounded the better too) once you barely got enough room to stick in that 2nd tip, do so.... grab a plate [must have high edges, a bowl will work to, but they tend to be harder to scrape] (high quality highly recommended, you're gonna need something flat as fuck, with no real blemishes, or you're gonna have a bit of work to do, or gonna ose alot of your work)

hold the tip over the center of plate/bowl, and put the butane tip into the tip you melted earlier, and press, discharging the butane... now this next part, it's not exaclty easy to see so keep a sharp eye.... at first, liquid will come pouring out with a very slight yellow tint... (make sure nothing spills over the edges... if it's about to spill over, pause a second and wait for some evaporation) keep pushing butane through til the liquid coming out is COMPLETELY clear...

let the butane evaporate (doesn't take long at all) and scrape up the remaining witha razor blade... there's your honey oil.... after you got it scraped up, grab a paper, and apply it gently like you would apply butter to a peice of bread... it helps if you but a lighter to the side opposite the blade (the part you hold) for a few seconds... just the slightest heat makes that honey oil extremely easier to work with...