THC coated rolling papers

[slipknotpsycho]

alright my best indication is that it would require cold to cure seeing as heat will vaporize the THC and melt the paper lol. so im gunna try that, and i really like your flour idea, although i wasnt planning on sticking them in a book its defanitly something i shoul consider doing anyways to see what works.

im gunna get started on this tonight, i would like to ask though, are there any honey oil tutorials on here? all mine is gross and hard lol and i cant use it. thanks!

DO NOT DO THIS IN YOU RHOUSE OR A CLOSED ROOM, DO NOT DO THIS ANYWHERE NEAR SPARK OR FLAME... DO NOT SMOKE DRUING THE PROCESS... YOU CAN LITERALLY BLOW YOURSELF UP... (i have to add my warning... with proper caution it's completely safe, but if you ignore saftey, of course you can end up paying some ultimate price... a limb or your life... so just be careful.... if you're doing it anywhere near anyone (i had a friend around) stress how no playing, no sparks or no flame sources is extremely important... like i said, safe when done safely, deathly when ignoring the saftey...

there's a couple actually, both are the same, just the device that holds the weed differ....

one, get a bic pen, hollow it out, (gotta have to ends, the coned ones...you know the writing side) grab a can of butane (only one i know for sure is safe [some have additives] and put a lighter to the tip of the end to get it nice and soft, then push the tip of the butane in it (without actually discharging the butane) so it's the right size... stop it about half way in (so the tip will have something to push against, to discharge the butane)

now, take that pen, put one tip in it (the one not modified) and pack weed in the pen as tight as you can (the finer grounded the better too) once you barely got enough room to stick in that 2nd tip, do so.... grab a plate [must have high edges, a bowl will work to, but they tend to be harder to scrape] (high quality highly recommended, you're gonna need something flat as fuck, with no real blemishes, or you're gonna have a bit of work to do, or gonna ose alot of your work)

hold the tip over the center of plate/bowl, and put the butane tip into the tip you melted earlier, and press, discharging the butane... now this next part, it's not exaclty easy to see so keep a sharp eye.... at first, liquid will come pouring out with a very slight yellow tint... (make sure nothing spills over the edges... if it's about to spill over, pause a second and wait for some evaporation) keep pushing butane through til the liquid coming out is COMPLETELY clear...

let the butane evaporate (doesn't take long at all) and scrape up the remaining witha razor blade... there's your honey oil.... after you got it scraped up, grab a paper, and apply it gently like you would apply butter to a peice of bread... it helps if you but a lighter to the side opposite the blade (the part you hold) for a few seconds... just the slightest heat makes that honey oil extremely easier to work with...

[slipknotpsycho]

oh yeah, the pen method gives you about enough for one paper coating... the other method i know of requires atleast an oz of weed.... but gives you alot more (not alot, ust alot more lol... an oz might, MIGHT yeild about a half a pill bottle's worth, but i highly doubt you'd get that much...)

[Coelho]

alright my best indication is that it would require cold to cure seeing as heat will vaporize the THC and melt the paper lol. so im gunna try that, and i really like your flour idea, although i wasnt planning on sticking them in a book its defanitly something i shoul consider doing anyways to see what works.

You could use two things in the place of the flour. One is grind a small amount of weed to a powder, as fine as you can, then sprinkle the coated paper with it. Or use powdered graphite. Take a pencil, and scrape its tip with a knife until you get the desired amount. The graphite is harmless when burnt, as it is pure carbon, which is converted to CO2 during the burning.

I think the cold would make the oil harder, so its a good choice for curing it.

im gunna get started on this tonight, i would like to ask though, are there any honey oil tutorials on here? all mine is gross and hard lol and i cant use it. thanks!

That recipe posted by slipknotpsycho is very good. But if you want know another way to doing it, look at:

http://boards.cannabis.com/recreatio...-hash-oil.html

Note that hash oil is another name for the same thing.
So, good luck and tell us if you succeed! :thumbsup:

[4gan2ja0]

wax paper:thumbsup:

[slipknotpsycho]

DO NOT DO THIS IN YOU RHOUSE OR A CLOSED ROOM, DO NOT DO THIS ANYWHERE NEAR SPARK OR FLAME... DO NOT SMOKE DRUING THE PROCESS... YOU CAN LITERALLY BLOW YOURSELF UP... (i have to add my warning... with proper caution it's completely safe, but if you ignore saftey, of course you can end up paying some ultimate price... a limb or your life... so just be careful.... if you're doing it anywhere near anyone (i had a friend around) stress how no playing, no sparks or no flame sources is extremely important... like i said, safe when done safely, deathly when ignoring the saftey...

there's a couple actually, both are the same, just the device that holds the weed differ....

one, get a bic pen, hollow it out, (gotta have to ends, the coned ones...you know the writing side) grab a can of butane (only one i know for sure is safe [some have additives] and put a lighter to the tip of the end to get it nice and soft, then push the tip of the butane in it (without actually discharging the butane) so it's the right size... stop it about half way in (so the tip will have something to push against, to discharge the butane)

now, take that pen, put one tip in it (the one not modified) and pack weed in the pen as tight as you can (the finer grounded the better too) once you barely got enough room to stick in that 2nd tip, do so.... grab a plate [must have high edges, a bowl will work to, but they tend to be harder to scrape] (high quality highly recommended, you're gonna need something flat as fuck, with no real blemishes, or you're gonna have a bit of work to do, or gonna ose alot of your work)

hold the tip over the center of plate/bowl, and put the butane tip into the tip you melted earlier, and press, discharging the butane... now this next part, it's not exaclty easy to see so keep a sharp eye.... at first, liquid will come pouring out with a very slight yellow tint... (make sure nothing spills over the edges... if it's about to spill over, pause a second and wait for some evaporation) keep pushing butane through til the liquid coming out is COMPLETELY clear...

let the butane evaporate (doesn't take long at all) and scrape up the remaining witha razor blade... there's your honey oil.... after you got it scraped up, grab a paper, and apply it gently like you would apply butter to a peice of bread... it helps if you but a lighter to the side opposite the blade (the part you hold) for a few seconds... just the slightest heat makes that honey oil extremely easier to work with...

damn my drunk ass, i forgot a few points lol...

first there are a couple of butane extraction methods (there ar ealot of others, butane is the absolute fastest) next, i meant two pen tips (i said something like "to pen tips") third, i forgot to say the name of the butane.. i meant to say Ronson butane... (there are methods of testing if a butane is safe to use, if you can't get your hands on Ronson say so and i'll post the test)

any other method is the 'safest' but any of them take FAR longer then this method... even boiling out alcohol takes up to 20-30 mins atleast... evaporating butane takes less than 3 minutes (depending on the ammount... for OZ extractions, it's closer to 30 mins) just gotta be safe... no one method is actually better then the other... if one's faster, it poses more of a risk...

[xcrispi]

We wipe out our 1 gallon jars we cure in w/ papers n smoke fattys w/ em .
Peace
Crispi :jointsmile:

[Jimbob1310]

ive seen joints with the paper being hash once on some site u just press it into thin sheets after u bubble bag it...looked sweet but best to put the oil inside of the paper thatway it all dont burn off and use a thicker paper

i was going to completely coat the papers with the oil

update: getting a batch of hash oil going in a few hours, i MIGHT have something useable by tommorow :rastasmoke: ill let you all know

[LIP]

If i've got enough oil i'll just roll a j and then dip it in and hang it and let it dry. Or i roll the buds in it and then let them dry. BUt it's a good idea