Printable View
sup guys,,, i have a Q for ya'll
a buddy of mine just bought a HydroHut, the original size (52" x 52" x 7' tall)
it was kind of expensive so i'm lending him my air cooled sun system reflector
my Q is..
what size extractor fan should he get so that it will effectively pull air thru a
carbon filter, thru the hood, and out the top of the hut???
edit: he's running 1K btw
Id go with a 6" vortex with a speed controller. The problem with doing it that way is the reflector has to be 100% sealed or else the odor will get pulled in through the leaks in the glass and not get filtered.. If your doing it that way, you might want to build a box so you can put the filter inline after the light but before the fan. I wish that how mine was.
damnnnnnn, i never thought of that hahaha im callin his ass right now!! good idea dusto!!!
hang on a sec... im gonan paint up a design and post it
if you look at seme of the other threads iv created, you can see my setup. i avea HH too.
lol brilliant design, i did the same then noticed you added that pic at the last second ;p
so what size fan should i tell him to buy??? with it having to move all that air
Ll, hope that helps. I Thats the best design i can think of using 1 fan. I use a 6" to cool my HPS and a 4" vortex for exhaust/filter.
i dont know how a 4" would cool a 1K HPS. I get the plants within 12 inches and dont have any residual heat from the light. Another guy Doco on here uses a 6" as well, along with a speed controller to lower it. The filter will reduce the amount of air the fan moves, so remember that. I wouldn't risk all my plants over a few bucks. I have a speed control and it lets me dial in the exact amount of air i want to move. I can tune it to use the light as a heater during these cold nights here in cali.
He could try a 4", but if it doesn't work, then he's stuck buying the bigger one and stuck with the small one. Like the might Zandor says "if you go cheap, you grow cheap"
LoL, kinda like confucious.
A Dayton 465cfm or a Hydrofarm465 and a speed control.
Ga Grown!
what if the 4" sun system was connected to this.. EcoPlus 6" Centrifugal Fan 440 cfm | Exhaust Fans & Circulators
would that work>>?
those will work fine. The vortex is cheaper and they come with a 10 year warranty
should i recommend a speed controller with that??? if so where can i find one, ive never seen em before
here's the one i got, from the same website you posted the like from
The Speedster Fan Speed Control | Fan Accessories
see, he can use the fan for vegging ehxaust too, he can turn the speed down.
ive got alot of stuff to ask you dusto,,, email me your screen name for AOL or whatever msg system you use
umrocksmysocks at yahoo dot com
if thats aight with you..
alrithe [email protected] yahoo instant messenger, i gotta install, hold on
hey dude, whats your Yahoo IM?
makin one right now..