Printable View
My temperatures are around 30 degrees celius or 90 degree fehrenheit.
A little bit more at times, only reduced to two 26w bubls to minamize the heat, but still seems too much. Have different brands so on and similar results.
Added a small computer fan that's blowing on the plant, and will add a exhaust fan soon hopefully.
Is it normal for cfl to have these temps?
Thought with cfl I wouldnt have to result to fans so on for temp control.
yeah instead of taking out a bulb put in a fan even a cheapo wallmart fan they still have one or two in the heater section. just let it blow around until you build an exhaust. keep your temps under 80
Hey 'sup,
Well a couple things...
One, that's not a cfl... just a tube flouro... you'd get much better light with a swirly-bulb type flourescent (which is what everyone on here refers to as a CFL) and that tube there may not be enough light for your plant.
The other is that the thermometer's probe will read more accurately if it hangs free in the air. Dark soil absorbs light and therefore heat... it might be reading high.
You want 'cool white' type lights right now in the seedling and then veg stage and you also need lots of ventilation. A fan blowing on the plant is a start, but you need a true exhaust to get you temps under control.
oh shit I forgot:jointsmile:
keep it up bro grow those little fuckers:jointsmile:
i think he does have two cfl and the tube light.....its a little hard to see because of the white pot but they are there:thumbsup:
Damn I was getting worried for a little bit.... thought you were sleeping on the job...Quote:
Originally Posted by the yeag
[the Yeag's job is to hassle noobs. My job is to flame kids trying to burn their parents' houses down by growing under their beds. Now you know]
Kind of glad you posted, I've spend more than enough reading, including your work so thanks for the advice but most of those things are in the process or in the thoughts. Which spectrum of light so on.
My log is there http://boards.cannabis.com/showthread.php?t=93727 :-)
I'll have to update that, a better pic can be found though of the cfl.
Fine, she just better be a girl the sibling is near dead.Quote:
Originally Posted by stinkyattic
Yes it is, just cant see well because of its light. Look right over the pot.Quote:
Originally Posted by stinkyattic
It's only sprouted right now so figured it doesnt need that much if I'm not mistaken. The flouro is a backup and used mainly when visitors are by so it doesnt give away too much.
Agreed, theres a inner and outer temp both are too high. Soil increase temp. thought of that most of the time its hanging off the side and thinking of some kind of stick support.Quote:
Originally Posted by stinkyattic
Agreed 90% are daylight 6500k, two are 4000k and two 2600k. Only 6500k for sprout/veg. Probably HPS for flowering. Haven't decide if I need two different locations for the stages or just to make a converting unit.Quote:
Originally Posted by stinkyattic
And as for fans it's a temporary measure until I can find a inline duct fan. Homedepot too pricy. Ebay alright but shipping costs and from states will take too long. Not sure if one with a filter will be enough but I guess time will see if it is or isnt.
What about a home depot fart fan? You'll have to wire a replacement cord to it to make it a plug-in but at like $14 you can't go wrong. That's what used to cool my old grow room.
They're in the aisle with the sinks and toilets and shit
Almost forgot aswell, you must have a really exciting life going after all the noobs online all the time. Makes your day all that better? :pQuote:
Originally Posted by the yeag
It will come with time and my teachings...I will show you the way:jointsmile: but first leave canada eh:jointsmile:Quote:
Originally Posted by Pasofol
Cheapest one was still like 40, and all of them had housing not inline. Looking to make a homemade activated carbon filter so inline ideal. If I get desperate I'll get one until then I'm hopeful for one like this. http://www.homedepot.com/prel80/HDUS...gin.0&MID=9876Quote:
Originally Posted by stinkyattic
I'll probably mount a fan controller aswell so wiring shouldn't be a problem in my case. Bed not too far :-)
Seems the american homedepots have a better selection of this stuff than my local one.
You're just giving the Yeag more fuel Eh!Quote:
Originally Posted by Pasofol
:D
I snagged a squirrel cage fan out of a microwave oven. Workes wonders. Not recommended if you don't know your way with tools & electricity.
Otherwise, a small oscillating fan will do till an exhaust is made.
Yeah I had heat problems with CFL's aswell..The room temp around your cab can greatly affect the temp inside the cab because one I moved mine things changed almost instantly.
Thats what I ended up doing, closing off the heater in the room completely and opening the window.Quote:
Originally Posted by JEFFAR420
Now it was getting too cold, lol.
stinky has a good idea with the fart fan... that's my main, 24 hour exhaust. works wonders.
yeag, i'm going to steal a pic! you'll see...
love, kp:p
Hi, steal what you like but not my plants.
I'm keeping the door open for now until the exhaust gets worked out.
I'm still hunting for a hps system, in which case an exhaust filter would be needed and a cooling tube for the hps since its too small of a space to have it. Boxing day I'll hit some stores and hopefully pick up an inline fan or a fart one.
yeag.....get a brain morans has got to be one of the funniest thngs i have ever seen......