Printable View
Ok, I finally got some screen so my weed wont just fall if it's shake, now I need to figure out what is good enough to be used for a bowl? Also I can't think of any other way to make this wire stick to anything that could be used for a bowl so would super glue be bad to inhale if it possibly got burned or heated?
yes super glue = bad idea, a good bowl could be anything guy. Socket wrench pieces are good. Just look around the internet and be creative on making a homemade pipe, but one thing, why dont you just make a homemade bong if anything bongs work alot better and their alot cleaner to smoke.
Because I'm a on the go guy and I need things that are very important to me to be small enough to fit in my pockets :). That's one of the reasons I've been a blunt/joint smoker up until now noticing that I need to give that stuff a break sometimes so I use created a pipe, something small enough that would fit in my pocket or sock and works great.Quote:
Originally Posted by Kronic King
go buy a one hitter for like 10 bucks
Those are very uncommon around here :p. I wouldn't even know where to find one if it was not on the internet. I could actually order a pipe if I wanted, I got the o.k. to but I just don't want to. I want to make mines :p.Quote:
Originally Posted by jaGerbom
ohh haha...well my lazy ass would just go ahead and order it but making things is always fun....i would use a socket for the bowl
for the record cigarette one hitters are the shit
you cant look like a badass when you whip out a homemade pipe to smoke out of bro, keep the homemade pipes at home. you probally dont want to hear this but you should buy a pipe off the internet, they are more reliable and they just look better too.
Here, try this out Orange. I know you will like it. :)
What you need:
-Pom Pomegranite Juice bottle, the larger ones are better (3 chambers), but the smaller ones work fine (2 chambers)
-2" x 2" piece of flexible screen, made of metal
-1 nylon zip tie
-2 pieces of metal tube (hardware store!) one that can fit inside the other
-1 O-ring that will fit snugly over the smaller tube, and when put on the smaller tube, prevents it from falling through the larger tube
-1 socket wrench attachment that fits snugly over the smaller tube
-some hot glue (not needed but best)
-some real oldschool clay (not needed but best)
Okay, first off, let me show you why I chose the Pom bottle:
http://www.packagingdigest.com/artic.../images/62.jpg
:D
Drink the juice, or save it for when you are stoned (very tasty!). Heat up the top section of the bottom chamber of the bottle with your lighter, get the larger metal tube wet, and stuff it through the melted plastic at a 45* angle.
http://img159.imageshack.us/img159/7375/stuffru4.jpg
http://img104.imageshack.us/img104/4849/stuffdk3.jpg
When the plastic has cooled, remove the tube from the bottle. Now take your piece of screen and your ziptie and cover the tip going INTO the bottle with the screen and secure it in place.
http://img118.imageshack.us/img118/4851/stuffst3.jpg
You can tell i'm bored and procrastinating. I'm not high though, go figure! haha.
Now stick that metal tube back into the bottle... and leave it there. Put some hot glue around the hole to secure it and seal it if you wish...
Next step, get the smaller piece of metal and put the O ring on it. Then put some clay at one end and put your socket over it. The clay is just to seal up the cracks when you put your socket on. Time to stick your new screen you got (not listed in materials needed) inside the socket. :)
Position the O ring about half an inch from the base of your socket... This will seal up the whole contraption when you are taking a hit, and protect your socket from falling off!
http://img295.imageshack.us/img295/2995/stuffzx5.jpg
Enjoy your new perckilated home-made bong that hits like a champ!
I would order a dugout...
Check out the plumbing section at the local hardware store......years ago I had one made out of a 1/2" to 1/4" 90 degree reducer and a 2 1/2" long 1/4" pipe....cast iron pcs are threaded and you can assemble almost any configuration you want in a matter of seconds.....the threads also hold the screen in place.
[attachment=o100932]
[attachment=o100933]
These are a bit large.......but you get the idea.
Get an apple, those are cheap... If you know anybody with tools (drill is really all thats necessary.) You can make your own wood pipe with a little creativity.... I have before, just use a type of wood that doesn't start burning and mixing with the weed smoke. It's cool cause you can get creative with it. Use a branch, sand it down, carve stuff...
i cant believe i havnt thought of the pom. juice idea! i get those all the time!
i got a new project to work on :thumbsup:
btw the juice is good as hell and its good for you
Here are some homemade pipes my dad made from his work.
the tubes are just slurpy straws.
just a pic for some ideas:thumbsup:
try a few local gas station's...around here they sell corncob pipes for a few bucks that smoke pretty well.:smokin:
woah just had an idea while in bed and had to get up
if u have ne extra inhalers laying around (i do) take the cartridge out....and use the inhaler casing thing to make a pipe
im gunna try this...i have a shitload of inhalers
sorry 4 double post i ran out of edit time
but yeh just put tin foil over the mouth part..poke some holes and light up!
im proud i thought of this simple ass thing :p :dance:
im sure im not the first to do it though