Printable View
So my friends and I want to try this, my idea was to take a couple of leaves and position them ontop of each other to form a rectangle(cutting where needed) and then press it and dry it slowly, and then when it's semi dry, roll it with some not fully dried herb, and then finish drying it as a blunt...anyone else have a guide to doing this? also we where going to use honey to keep the leaves to stick together.
it might work...
that sounds bad ass, you should cure the whole thing to get rid of the chlorophyl taste
that's what we planned on doing.
also we're gunna coat it in honey oil after it's cured.
im not gonna lie. that sounds rather enjoyable. bud on bud. you know.
ive heard of that before using the leaves as wrapers i had a guide to making it, if i can remeber correctly you would use a bambo shishcabob stick things you can get at any store and hash oil to form the buds to the stick and to glue the leafs to it (smaller leafs followed by slightly bigger so on and so forth) letting it dry inbetween layers and when your done you pull the stick out you got one hell of a smoke i dont know thou my mind is cinda foggy atm but i KNOW i found it when i was looking up joint rolling and it was in a zip package on a web site for free it included all sorts of ways to roll to... damn now that i think about it i just erased all my data like 5 days ago (bad virus-not caused by the file) so do some shearching around and youll prolly find it. :)
I've seen a vid on one of the sites with people doing it. Just the same as a cigar, but no tobacco.
Sounds like great idea. The hardest part will be getting a big enough area to be able to roll on. Tobacco leaves are big and fat but you'll need a bunch of pot leaves put together. Big fat indica leaves might work though. Cut them down a bit so they're rectangular and stick together. I think some pipe resin might work better than honey. Once you've got them all stuck together put them in the middle of a big, heavy book, like a dictionary, and let sit for a month or so to dry. Should work. Let us know the results.
If you can pull it off, you might have something with this idea.
Omfg I hate you, you are having me wanting to try this so badly now lol!
you should use kif and resin to stick them together, then like upnsmk said, dip it in hash oil. good times. :p
This guy I know wrote a joint rolling book where weed cigars was one of the creations. he used thai sticks but i dont see why you need to unless your making it fat becuase taking out the shikabob allows an air passage.
I would suggest a few layers of leaves and using a sticky non-molding substance like honey or whatnot to keep them in place, and curing is a definate yes.
in about a week or so I'll get some pictures of the experiment...
That sounds fuckin awsome man, I've always wanted to try some shit like that. let us know how it turns out.
Ive heard of this before, never tried it, but apparently its HARSH AS HELL on your throat etc.
Apparently Burns like a Blunt, but obviously no tobbaco and the Harshness factor..
Let us know how it goes man, im interested in seeing what it will look like / how it will smoke... :thumbsup:
take a sharpie and a bunch of leaves and roll them around the sharpie, do this until you cover the whole area making sure it stays together then coat the leaves in a small amount of honey leave it to dry for a good day.
now slide the sharpie out carefully and you should have a prehollowed blunt from leaves now grind up your herb and pack it in and enjoy the smoke, this works best with leaves that are still wet and pliable making it easier to roll them around the sharpie :)
that might be one of the illest ideas i have ever heard
Hye man, lets see them pics. Didnt somebody say they were trying it?
Like this? http://weedfarmer.com/joint_rolling/...abis-cigar.htm im sure you could use honey or something if you dont have all the stuff you need to stick it.. good luck
would that book be the joint rollers handbook by any chance??Quote:
Originally Posted by sirsmokesalot
1)first, find (or make) yourself a thai stick*, remove any thread and carefully coat the stick with liquid cannabis resin oil.
2)wrap the coated stick with small, uncured, 'top' leaves, remove any stems
3)secure teh leaves with thread and coat with more of the oil. leave to dry in a dark, dry warm place for a day or 2
4)remove the thread and repeat the process using progressively larger leaves.
5)when it is suitably sized, use large 'sun@ leaves to seal it, add a final coat of oil and secure with thread.
6) leave to dry slowely in a dark, dry, temperate place, for about 2 - 3 weeks.
7) when dry remove thread and carefully pull the sliver out.
*a thai stick is bud wrapped around a sliver of bamboo and left to cure
.. or read my post and click the link... so is someone gonna try this i cant until i start growin again.. maybe ill ask ithg to try it he seems to have more than enouf to make a few...
my bad didnt read all the thread:rasta:Quote:
Originally Posted by bud breath420
all good mate.. well is anybody gonna try this..? I might give it a go in a few weeks when i start growing again..Quote:
Originally Posted by johnnyAKABob
ive smoked one before but i didnt make it, my mate did, was damn good tho. when you start growing you should deffinatly give it a goQuote:
Originally Posted by bud breath420
heh sounds like a cool idea... i think it would be fun trying to get it to work...
Dude I had that idea last night. You should definetly do it
If you've ever smoked a blunt "wrap" you've probably noticed it's just ground, processed tobacco that has been pressed and rolled into sheets of brown paper. Perhaps you could apply the same principals to pot leaves?
Dry out some leaves, grind the shit up, moisten it somehow and press it.
If anyone tries this let me know.